Rust-Oleum Furniture Paint - Slate - 125ml

No, priming is typically not required, but it is always recommended to check the surface beforehand.

In most cases, one coat is sufficient due to the excellent coverage of the paint. However, a second coat may be necessary for complete coverage or to achieve a more vibrant color.

This paint is designed for indoor use. For outdoor furniture, consider a paint specifically designed for exterior applications.

The paint typically dries to the touch in about an hour. However, it takes a few days to fully cure and reach its maximum durability.

The 125ml tin will cover approximately 14m² per litre, so the coverage will vary depending on how many coats you need.

While it can be applied with a spray gun, using a brush or roller is the recommended method for most users.

The paint has a satin finish, which provides a low-sheen, smooth appearance.

Ensure the surface is clean and free of any contaminants. Lightly sand the surface if it's glossy or previously painted.

Apply thinner, more even coats. Avoid over-brushing or over-rolling. Make sure your brush or roller is of good quality.

Ensure adequate ventilation. The drying time can be affected by humidity and temperature.

Use a high-quality brush or roller. Apply thin, even coats, and avoid overworking the paint.