Barrettine Peelaway 1 Paint Remover - 5kg

Barrettine PeelAway 1 is designed to strip up to 32 layers of paint and varnish in a single application, depending on the paint type and condition.

It is suitable for use on wood, metal, brick, stone, and plaster.

Yes, the 5kg kit includes the stripping poultice, specialized blankets, a spatula, and a neutraliser.

Dwell time typically ranges from 12 to 48 hours, depending on the paint type and the number of layers. Always refer to the specific instructions on the product packaging.

Always work in a well-ventilated area and wear appropriate PPE, including chemical-resistant gloves, eye protection (goggles or face shield), and a respirator if ventilation is poor.

Yes, it is specifically effective at removing old oil-based and lead-based paints, making it suitable for restoration projects.

Dispose of waste materials according to local environmental regulations. Do not pour down drains or into waterways.

Increase the dwell time, apply a thicker layer of poultice, or ensure the blankets created a sufficient airtight seal. For very thick coatings, a second application may be necessary.

This usually indicates the blanket seal was not airtight. Try re-wetting the dried area with a little more poultice or water (if recommended by manufacturer for the specific product stage) and re-cover, or proceed with scraping and plan for a second application.

Ensure the neutraliser was applied correctly and thoroughly. Rinse the surface well with water after neutralizing. Some discoloration may occur with very old paint layers, but should be minimal if instructions are followed.

Ensure sufficient dwell time has passed. If the paint is still too hard, it needs more time. If it's become gummy or re-hardened, check if the neutraliser was applied too early or if the area was exposed to air for too long.