Setup, Compatibility & Care
Setup
- Preparation: Turn off and unplug your laptop. Touch a grounded metal object to discharge static electricity.
- Locate Memory Slots: Consult your laptop's manual to find the RAM slots.
- Open the Laptop: Carefully open the access panel or remove the necessary screws to access the memory slots.
- Install the RAM: Align the notch on the RAM module with the notch in the memory slot and firmly press down until the clips click into place.
- Close the Laptop: Secure the access panel or replace the screws.
- Power On: Power on your laptop and check if the new memory is recognized in the BIOS or operating system.

Compatibility
- Check Specifications: Ensure your laptop supports DDR4 RAM and has a 260-pin SO-DIMM slot.
- Clock Speed: Confirm that your laptop's motherboard supports 3200MHz or higher. If not, the RAM will run at the maximum supported speed.
- Consult Manual: Refer to your laptop's manual for specific memory compatibility information.
Care
- Handle with Care: Avoid touching the gold connectors on the RAM modules.
- Static Protection: Always discharge static electricity before handling the RAM.
- Proper Installation: Ensure the RAM is correctly seated in the memory slots.
- Avoid Overheating: Ensure proper ventilation in your laptop.