JCP Fixings Drop-In Anchors - Gold
Best current price£30.46from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£30.46Visit shop Jcp Fixings Drop-In Anchors Zyp - M20/25 X 80 (Box Of 25) - Gold
Visit shopThe Range£30.46Visit shop All Offers
5 offers from £30.46 - £34.12
View price history by clicking the chart icon.
The RangeJcp Fixings Drop-In Anchors Zyp - M20/25 X 80 (Box Of 25) - Gold
Free delivery in 1–3 days
£30.46
Visit shop
OnBuy.comJcp Fixings Drop-In Anchors Zyp - M20/25 X 80 - Fjdbm20 - Box Of 25 5014196004211
Free delivery in 1–3 days
£31.27
Visit shop
eBayJcp Fixings Drop-In Anchors Zyp - M20/25 x 80 - FJDBM20 - Box of 25
Free delivery in 1–3 days
£31.40
Visit shop
DebenhamsJcp Construction Products Unisex Gold Drop-In Anchors Zyp - M20/25 X 80 - Box Of 25 In
Free delivery in 1–3 days
£32.75
Visit shop
B&QB&Q - Drop-In Anchors Zyp M20/25 X 80Zinc-Plated SteelBox Of 25
Free delivery in 1–3 days
£34.12
Visit shop
Product Information
Full details
The JCP Fixings Drop-In Anchors are designed for professional contractors and dedicated DIY enthusiasts seeking a secure, flush-mount fastening solution in solid concrete. These anchors provide a reliable and permanent threaded fixing point for heavy-duty applications, though they require a specific diameter drill bit and a manual setting tool to ensure proper expansion within the material.
All features
| Colour | Gold |
|---|---|
| Model Part Number | 1427016 |
| Brand | JCP Fixings |
Extended Product Information
FAQs
Can these anchors be reused?
No, these are designed as permanent, single-use mechanical anchors.
Do I need a special tool to install these?
Yes, a specific setting tool corresponding to the anchor size is required to properly expand the internal cone.
Are these suitable for wall mounting?
Yes, as long as the base material is solid, structural-grade concrete.
What is the purpose of the Gold finish?
The Gold zinc yellow passivated coating provides a layer of protection against corrosion and environmental wear.
Can I use these in hollow bricks?
No, drop-in anchors require solid concrete to generate the expansion force necessary for a secure hold.
What happens if I drill the hole too deep?
If the hole is excessively deep, the anchor may sit too far below the surface, making it difficult to attach your fixture.
Troubleshooting
The anchor spins in the hole after setting.
The drill hole is likely too large. Ensure the drill bit diameter matches the specifications precisely.
Bolt will not screw into the internal thread.
Check the thread size compatibility or ensure no concrete debris has entered the internal threads during installation.
Anchor pulls out under load.
The concrete quality may be insufficient or the hole was not drilled to the correct depth. Verify concrete density before re-attempting.
Pros and Cons
Pros
- High-strength mechanical hold in solid concrete
- Flush profile maintains a clean installation surface
- Durable zinc yellow passivated coating for corrosion resistance
- Compact dimensions ideal for narrow or shallow fixing points
Cons
- Requires a specific setting tool for correct expansion
- Permanent fixture; cannot be easily removed or repositioned
- Not suitable for use in soft brick or hollow masonry
- Requires precise drill hole depth for optimal expansion
Setup, Compatibility & Care
For a successful installation, use a masonry drill bit that matches the required diameter of the anchor sleeve. Always clear concrete dust from the hole using a brush or compressed air, as debris can prevent the anchor from seating properly. When setting, strike the setting tool firmly until it bottoms out against the rim of the anchor to confirm it is fully expanded. These anchors are maintenance-free once installed, but ensure the applied bolt is appropriately sized for the anchor's internal thread to avoid cross-threading. If the anchor is used in an outdoor or humid environment, periodically inspect the bolt head for signs of rust.