Cistern Lever Ideal Standard 3/8" White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This FNX Bathrooms Cistern Lever in White is designed for Ideal Standard cisterns with smaller thread holes, featuring a 3/8" BSP thread. It offers a straightforward replacement for faulty or outdated cistern levers, providing a reliable flush mechanism. A key caveat is its specific compatibility with Ideal Standard cisterns and the 3/8" thread size, meaning it may not fit other brands or cistern types.
All features
| Colour | White |
|---|---|
| Brand | FNX Bathrooms |
Extended Product Information
FAQs
What type of cisterns is this lever compatible with?
This lever is specifically designed for Ideal Standard cisterns that have a 3/8" BSP thread size for their cistern levers. It is not compatible with universal cisterns or those with different thread sizes.
How do I know if I have a 3/8" BSP thread size?
A 3/8" BSP thread is a smaller thread size commonly found on specific Ideal Standard cistern models. If your current lever screws into a small threaded hole on the cistern, and you have an Ideal Standard toilet, it is likely compatible. For certainty, measure the thread or consult your toilet's manual.
Can I install this lever myself?
Yes, this cistern lever is designed for straightforward replacement and can typically be installed by a DIY enthusiast. Basic plumbing knowledge and tools are recommended. Full instructions are provided in the Setup section.
What tools will I need for installation?
You will likely need an adjustable wrench or pliers to tighten and loosen the internal nut securing the lever inside the cistern.
What should I do if the lever is leaking after installation?
Check that the internal nut is tightened sufficiently, but not excessively. Ensure the sealing washer is correctly seated. If the leak persists, the cistern's thread or the lever's thread may be damaged, or a different sealing method might be required.
Does this lever come with a flushing mechanism or just the lever arm?
This product is the cistern lever itself, including the external arm and the internal threaded connection with a nut. It is designed to operate the cistern's existing flushing mechanism (e.g., a flapper valve or syphon).
How should I clean the white lever?
Clean the lever using a soft, damp cloth. Avoid abrasive cleaners, bleach, or harsh chemicals that could damage or discolour the white finish.
Troubleshooting
Lever feels stiff or difficult to operate
Ensure the internal nut is not overtightened. Check that the flushing mechanism inside the cistern is not obstructed and moves freely.
Water leaking around the lever thread
Tighten the internal nut securing the lever to the cistern. Ensure the washer or seal (if applicable) is correctly positioned and not damaged.
Flush does not activate or is weak
Verify that the lever's arm or chain is correctly connected to the cistern's flushing mechanism. Ensure the cistern is filling to the appropriate water level.
Lever does not fit the cistern hole
Confirm that your cistern is an Ideal Standard model and has a 3/8" BSP thread size. This lever is not a universal fit.
Pros and Cons
Pros
- Specifically designed for Ideal Standard cisterns
- 3/8" BSP thread suits cisterns with smaller holes
- Clean white aesthetic complements bathroom decor
- Ensures reliable toilet flushing
- Straightforward replacement for existing levers
Cons
- Only compatible with Ideal Standard cisterns
- Limited to cisterns with 3/8" thread size
- White colour may show staining over time
- Not suitable for universal cisterns
Setup, Compatibility & Care Instructions
Compatibility:
This lever is specifically designed for Ideal Standard cisterns that utilize a 3/8" BSP thread connection. Before purchasing, verify that your existing cistern has a smaller thread hole intended for a 3/8" fitting. It is not a universal fit and will not be compatible with cisterns from other brands or those requiring a larger thread size.
Setup:
- Turn off the water supply to the toilet cistern.
- Flush the toilet to empty the cistern.
- Unscrew the nut holding the old lever in place from inside the cistern.
- Remove the old lever from the outside of the cistern.
- Insert the new lever through the hole in the cistern.
- Inside the cistern, screw on the new nut firmly onto the lever's thread.
- Ensure the flush arm/chain from the lever is correctly attached to the cistern's flushing mechanism.
- Turn the water supply back on and check for leaks around the thread.
- Test the flush to ensure it operates correctly.
Care:
To clean the lever, use a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the white finish. Periodically check the tightness of the internal nut to ensure a secure fit and prevent leaks.