Best current price£1.29from eBay
Shopping.co.uk recommended and popular offers
eBay£1.29Visit shop Unifix General Purpose Chippy CSK Pozi Passivated Wood Screws 3.0 x 16mm Box 200
Visit shop
The Range£3.70Visit shop Unifix General Purpose Chippy Woodscrews 3.0 X 16Mm - 9Chippy/010 - Box Of 200 - Grey
Visit shop29 offers from £1.29 - £6.60
View price history by clicking the chart icon.
The Unifix General Purpose Chippy Woodscrews are ideal for DIY enthusiasts and professionals undertaking a wide range of woodworking projects. Their key benefit lies in their versatility and robust corrosion resistance, ensuring durability in various environments. A potential caveat is their specific thread type, which is optimized for woods and softer materials. These screws feature a flat head and fine thread, coated with yellow zinc for 72-hour salt spray resistance. They are engineered for high hardness and strength, reducing head damage and working well with manual or electric tools, making them suitable for wood, plasterboard, chipboard, concrete, walls, decks, and plastic.
| Colour | Yellow |
|---|---|
| Model Part Number | 5014196492063 |
| Brand | Unifix |
These screws feature a Pozi Countersunk (Csk) head, typically requiring a Pozi drive screwdriver bit, commonly size PZ2.
Yes, the yellow zinc galvanized coating provides good corrosion resistance, tested for 72 hours of salt spray, making them suitable for many exterior applications. However, for highly corrosive environments or prolonged direct water exposure, stainless steel might be a better choice.
Pre-drilling is recommended, especially for hardwoods or chipboard, to prevent splitting and make driving easier. For softwoods and plasterboard, it may not always be necessary but can improve results.
The fine thread provides a strong grip in denser materials and allows for better pull-out resistance in woods, chipboards, and plasterboard. It also helps in achieving a clean finish without damaging the material.
They are designed to withstand 72 hours of salt spray testing, indicating a good level of resistance to corrosion for typical use.
Yes, they can be used in concrete, but typically require the use of a wall plug or anchor appropriate for concrete, as the screw itself is not designed for direct threading into masonry.
'Chippy' generally refers to woodchip or particleboard, indicating the screw's suitability for such materials, though they are versatile enough for general woodworking.
Ensure you are using the correct size Pozi drive bit (PZ2 is typical). Apply firm, consistent downward pressure. If the material is very hard, try pre-drilling a pilot hole or using a lower torque setting on an electric driver.
Check if the material is too soft or if the pilot hole is too large. For plasterboard or concrete, ensure appropriate wall plugs are used in conjunction with the screw. For wood, a larger diameter screw or a deeper thread engagement might be necessary.
This can happen if the pilot hole is too shallow or if the material is resisting the countersink. Ensure the pilot hole is adequately sized for the screw's head to countersink properly. Gentle over-driving might be needed, but be careful not to strip the head.
While rated for 72 hours of salt spray, prolonged exposure to extreme moisture or corrosive environments can eventually affect the coating. Ensure screws are stored in a dry place and wipe clean if exposed to moisture.
Setup: Ensure you have the correct Pozi drive screwdriver bit (PZ2 is common) compatible with the screw head. For harder woods or to prevent splitting, pre-drilling a pilot hole slightly smaller than the screw's core diameter is recommended. Drive the screw steadily, ensuring the head sits flush with the surface once tightened.
Compatibility: These screws are compatible with a wide range of common building materials including softwoods, hardwoods, plywood, chipboard, plasterboard, plastic, and concrete (with appropriate wall plugs). They work with both manual screwdrivers and most standard electric drills/drivers.
Care: Store screws in a dry environment to maintain the integrity of the yellow zinc coating. Avoid prolonged exposure to harsh chemicals that could degrade the coating. After use, if screws become dirty, wipe them clean with a dry or slightly damp cloth.
