Best current price£12.11from The Range
Shopping.co.uk recommended and popular offers
The Range£12.11Visit shop Jrp Riveting Products 4.8 X 30Mm Aluminium Dome Head Rivets - Jrpad4830 - Box Of 200 - Grey
Visit shop37 offers from £12.11 - £19.14
View price history by clicking the chart icon.
The JRP Riveting Products 4.8 x 30mm Dome Head Rivets are designed for professionals and DIY enthusiasts who require a reliable and durable fastening solution for lightweight applications. These silver-finish rivets offer a clean, professional aesthetic and are engineered for quick installation with standard manual or pneumatic rivet tools. While they provide excellent strength for various metal-joining projects, users should verify that the 30mm length is appropriate for their specific material thickness to ensure the rivet expands and seats correctly.
| Colour | Silver |
|---|---|
| Model Part Number | 1321721 |
| Brand | JRP Riveting Products |
No, these are specifically designed for lightweight fastening applications and should not be used for critical structural load-bearing requirements.
Yes, they can be used on plastic, provided you use a backing washer to prevent the rivet from pulling through the softer material.
Any standard manual hand-riveter or pneumatic rivet gun capable of handling 4.8mm rivets will work.
They are made of aluminum which is naturally corrosion-resistant, but they are not strictly 'weatherproof' for marine or extreme chemical environments.
Yes, but they are permanent fasteners. To remove them, you must drill out the head of the rivet using a drill bit of the same size as the rivet shank.
Ensure the hole is not too large and that the debris from the drilling process has been cleaned away before inserting the rivet.
Check that the rivet gun nose piece is the correct size for a 4.8mm diameter rivet and that the tool is held perfectly perpendicular to the surface.
Verify that the material thickness is sufficient for the 30mm length and that you have applied enough force to fully deform the rivet tail.
To install these rivets, first drill a hole slightly larger than the 4.8mm diameter of the rivet shaft. Insert the rivet into the hole and engage the mandrel with your riveting tool. Squeeze the handle until the mandrel snaps, indicating the rivet has properly expanded on the blind side to lock the materials together. For long-term care, ensure that the joined materials are kept dry if exposed to extreme environments, as the aluminum composition can be susceptible to galvanic corrosion if used with dissimilar metals in highly humid or saline conditions.
