Evo-Stik Tube Impact Contact Adhesive Glue - Red - 30g

It bonds to wood, MDF, laminate, metal, rigid PVC, cork, leather, rubber, glass, stone, and ceramics.

The adhesive becomes touch dry in about 10-20 minutes, depending on environmental conditions.

No clamping is needed as it bonds on contact. However, clamping may be beneficial for uneven surfaces or to provide extra strength.

Store in a cool, dry place, and replace the cap tightly after use.

While it can be used outdoors, prolonged exposure to the elements may affect the bond's durability. Consider the environment when choosing this adhesive for outdoor use.

Cured adhesive may be removed by scraping or using a solvent such as acetone or a suitable adhesive remover. Be sure to test on an inconspicuous area first.

The shelf life depends on storage conditions. Check the product label for specific guidance, but it's typically a few years if stored properly.

Ensure surfaces were properly cleaned and prepared. Reapply the adhesive and clamp the materials for a longer period.

Check material compatibility. Rough up non-porous surfaces with sandpaper before applying adhesive.

Ensure the cap is tightly sealed after each use. Store in a cool, dry place. If the tube is blocked, try using a pin to clear the nozzle.