Best current price£8.23from The Range
Shopping.co.uk recommended and popular offers
The Range£8.23Visit shop Jrp Riveting Products 4.8 X 35Mm Aluminium/Steel Rivets - Jrpask4835 - Box Of 150 - Grey
Visit shop40 offers from £8.23 - £11.94
View price history by clicking the chart icon.
Designed for professionals and DIY enthusiasts alike, these 4.8 x 6mm countersunk head rivets from JRP Riveting Products provide a robust solution for permanent metal-to-metal fastening. They are ideal for applications requiring a smooth, flush surface, such as automotive bodywork and construction projects, though users should ensure they have the appropriate rivet gun capable of handling the 4.8mm shank diameter.
| Colour | Grey |
|---|---|
| Model Part Number | 5014196632834 |
| Brand | JRP Riveting Products |
These are primarily designed for metal joining; using them on soft plastics may cause cracking or deformation of the material.
No, they work with standard manual or power-assisted rivet guns capable of handling 4.8mm size rivets.
Yes, but it must be removed by drilling out the center of the rivet with a drill bit slightly smaller than the shank diameter.
The grey finish is standard; for highly corrosive environments, additional protective coatings or stainless variants may be preferred.
The total length of the rivet should be the thickness of the material being joined plus approximately 1.5 times the rivet diameter to allow for a proper bulb formation.
Ensure the hole has been adequately countersunk to accommodate the angle of the rivet head.
Check that the drill bit size is not too large for the rivet shank and ensure both material pieces are held tightly together during installation.
Ensure you are using the correct nosepiece for the 4.8mm diameter and verify the rivet gun has sufficient power or stroke to complete the pull.
Installation is straightforward but requires precise preparation. First, drill a hole through both materials that matches the diameter of the rivet shank (4.8mm). To utilize the countersunk feature, use a countersink tool to create a depression at the entrance of the hole. Insert the rivet, apply the rivet gun, and actuate the handle until the mandrel snaps. No specialized maintenance is required for the rivets themselves, but keep them in a dry, cool place to prevent oxidation before use. Ensure your tool's nosepiece is compatible with 4.8mm diameter rivets before starting.
