Harbour Housewares 120Pc Weed Membrane Fixing Set With Removal Tool - 15Cm - Silver

For general use, placing pegs approximately every 0.5 to 1 meter apart is usually sufficient. For areas prone to strong winds or on loose soil, increase the density to around 4-6 pegs per square meter.

While designed for weed membrane, these pegs can be used to temporarily secure garden netting, frost fleece, or outdoor mats, provided the material is not excessively heavy.

The pegs are typically galvanized metal, offering good resistance to rust for outdoor use. However, like all metal, prolonged exposure to harsh conditions may eventually lead to minor surface rust.

The plastic fixing plates help to spread the pressure exerted by the peg onto the weed membrane. This significantly reduces the likelihood of the membrane tearing, especially around the point of fixation.

With proper installation and care, the heavy-duty metal pegs are designed for long-term use in outdoor landscaping applications. Their lifespan will depend on environmental conditions and soil acidity.

Yes, the pegs and plates can be removed (using the provided tool or pliers) and reused. It's recommended to clean them of soil and debris before storing or re-deploying.

Ensure the ground is sufficiently moist. If the ground is very hard or stony, you may need to pre-loosen the soil with a garden fork or select an alternative anchoring method for that specific spot.

Ensure the plastic fixing plates are used correctly, distributing pressure evenly. Check that the pegs are not being hammered too aggressively, causing them to pierce through the fabric directly.

Ensure pegs are inserted deeply enough into the ground. For areas with high wind or loose soil, increase the density of pegs used, particularly around the perimeter.

Try to wiggle the peg gently while applying upward pressure with the tool. If pegs are deeply embedded, manual extraction with pliers might be necessary.