GFW Colonial 3 Door Bathroom Storage Unit - Grey

The product description does not explicitly state the dimensions. Please refer to the product listing on the retailer's website or the assembly manual for exact measurements (height x width x depth) before purchase.

Yes, it is designed for bathroom use. However, like most furniture, it's recommended to maintain good ventilation in your bathroom and wipe away any standing water or excessive moisture immediately to ensure its longevity.

While technically possible, painting the unit would void any finish warranty and may require specific preparation (sanding, priming) for proper paint adhesion. It's generally recommended to maintain the original finish.

Assembly time can vary depending on individual experience with flat-pack furniture. On average, it may take 1-2 hours for one person, or less with two people working together. Following the instructions carefully will help ensure efficient assembly.

The description indicates it's a freestanding unit. However, for added safety, especially in homes with children or pets, it is always recommended to anchor tall furniture to the wall using anti-tip hardware, if provided or available separately. > Info needed: [Confirm if anti-tip hardware is included].

The product description does not specify individual shelf weight capacity. It is designed for typical bathroom items like towels and toiletries. Avoid placing excessively heavy items on the shelves to prevent damage or instability.

Adjust the hinges on each door. Most hinges have adjustment screws (usually two or three per hinge) that allow you to move the door up/down, left/right, and in/out. Make small adjustments to one screw at a time until the doors are flush and close smoothly.

Ensure all cam locks and screws are fully tightened. Check that the unit is placed on a flat, level surface. If your floor is uneven, you may need to place small shims under the feet of the unit to stabilize it.

Stop assembly immediately. Check the parts list again thoroughly. If parts are confirmed missing or damaged, contact GFW customer service or the retailer you purchased from, providing your proof of purchase and a description of the missing/damaged items.

Ensure you are using the correct dowel/screw for the designated hole. If a dowel is too tight, gently tap it with a rubber mallet (or a regular hammer with a cloth barrier). Do not force screws; if resistance is met, ensure they are aligned correctly and that pre-drilled holes are clear.