Micro Fairy Lights - Gold

These lights require 2 x AA batteries, which are sold separately.

No, these lights are rated IP20 and are designed for indoor use only.

The timer function is set to operate for 6 hours at a time before automatically switching off.

These lights are not designed to be connected end-to-end. Each strand is self-contained.

The total length of the fairy light strand is 1.9 meters.

Gently wipe the wires and bulbs with a soft, dry cloth. Do not use any liquids or cleaning agents.

Each individual light element has dimensions of approximately (H) 4cm, 2 x (W) 3.6cm, and 3.8cm.

Check that the batteries are inserted correctly, with the positive and negative terminals aligned. Ensure you are using fresh AA batteries. Verify that the battery compartment is securely closed. Try switching the mode to 'On' to bypass the timer function temporarily.

This usually indicates low battery power. Replace the existing AA batteries with new ones. Ensure the battery contacts inside the compartment are clean and free from corrosion.

Ensure the lights are switched to the 'Timer' mode. Check that the batteries have sufficient power, as a low battery can affect timer function. The timer operates on a 6-hour cycle, so allow time for it to engage after switching to timer mode.

Inspect the affected LEDs and wires for any visible damage. If damage is found, contact customer support. If no visible damage is present and batteries are new, try gently wiggling the wire connections near the non-working LEDs. If the issue persists, it may indicate a product defect.