Hammerite Smooth Metal Paint - Satin Black - 2.5 L

No, this product is specifically formulated for outdoor use only.

For smooth surfaces, light abrasion is recommended to improve adhesion. For rusted surfaces, a wire brush is sufficient to remove loose debris.

You should allow the paint to dry for at least four hours before applying a second coat.

No, the paint is a 2-in-1 formula that functions as both a primer and a topcoat.

You must use Hammerite Brush Cleaner & Thinners to clean your brushes after use.

It is suitable for both ferrous and non-ferrous metals.

You are likely applying the paint too thickly. Apply thinner coats and ensure even coverage to prevent runs.

Verify that the temperature is within the recommended 8°C to 25°C range and ensure the surface was clean and dry before painting.

You may have failed to remove enough loose, flaking rust during the preparation phase. Ensure the surface is sound before applying the next coat.