Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Grain Guard Water Based Wood Stain SprayEnglish Oak400Ml
Visit shop8 offers from £13.99 - £30.99
View price history by clicking the chart icon.
Grain Guard Wood Stain Sprays are designed for DIY enthusiasts and professionals seeking an attractive, natural-look finish for wood surfaces. The key benefit is the ease of application and consistent coverage provided by the aerosol format, allowing for a beautiful, water-based stain. A potential caveat is the need for proper ventilation during use, as with all aerosol products.
| Colour | Brown |
|---|---|
| Brand | Grain Guard LTD |
Yes, Grain Guard Wood Stain Sprays are suitable for both interior and exterior wood surfaces. For enhanced durability on exterior projects, consider applying a clear protective topcoat after the stain has fully dried.
Drying time can vary based on temperature, humidity, and application thickness. Typically, it is dry to touch within 30-60 minutes and ready for a second coat in 2-4 hours.
It is best applied to unfinished wood. If applying over an existing finish, ensure it is fully cured, clean, and lightly sanded for adhesion. Always test on a small area first.
Coverage varies depending on the wood type and application method, but one 400ml can typically covers approximately 15-20 square feet with one coat.
Clean the nozzle immediately after each use by inverting the can and spraying until clear propellant comes out. For any spills on surrounding surfaces, wipe clean with a damp cloth while the stain is still wet.
Yes, Grain Guard Wood Stain Sprays are available in Light Oak, Medium Oak, English Oak, Dark Walnut, Black Ebony, and Dark Red Mahogany.
Ensure the can is thoroughly shaken. Clean the spray nozzle by inverting the can and spraying until clear propellant emerges. If the nozzle is clogged, it may need replacement.
Reduce the amount of stain applied per coat. Maintain a consistent spraying distance (10-12 inches) and motion. Allow adequate drying time between coats.
Wood type and porosity significantly affect stain absorption. Always test on an inconspicuous area first. Multiple thin coats may be needed to achieve a deeper shade.
Ensure the wood surface is properly prepared: clean, dry, and free of dust, grease, or old finishes. Lightly sand the surface before application if necessary.
Setup: Shake the aerosol can vigorously for at least two minutes before use. Hold the can upright, approximately 10-12 inches from the wood surface. Spray in a back-and-forth motion, slightly overlapping each pass to ensure even coverage. For best results, apply thin, even coats.
Compatibility: Grain Guard Wood Stain Sprays are compatible with most types of unfinished wood. Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Light sanding between coats may be necessary for optimal adhesion and finish.
Care: Clean spray nozzle immediately after each use by inverting the can and spraying for a few seconds until clear propellant emerges. Store cans in a cool, dry place away from direct sunlight and heat. For cleaning the stained surface, use a damp cloth. Avoid abrasive cleaners that could damage the stain.
