Village Green Ready To Use Wood Stain - Water Based, Eco Friendly, Premium Quality - White, 500Ml

Clean up is simple! Since it's water-based, just use water to clean your brushes, applicators, and any spills.

Yes, Village Green Wood Stain is suitable for both interior and exterior use. Make sure to apply a suitable top coat for exterior protection.

For most projects, two coats will provide good coverage. However, you can add more coats to achieve a deeper colour, letting each coat dry before applying the next.

You can finish with any type of finish. Oil, Lacquer, Varnish, Wax etc.

Coverage is approximately 12-15 m2/L on sanded wood.

Yes, it is non-toxic, eco-friendly, and odour-free, making it safe for use in your home or workshop.

The product is produced in the heart of the UK.

Ensure the wood surface is properly prepared by sanding. Apply thin, even coats and avoid over-application. Sand lightly between coats if necessary.

Ensure proper ventilation and check the temperature and humidity levels. High humidity can slow down the drying process. Allow more time for drying.

Test the stain on a hidden area of the wood before applying it to the entire surface. The final color can be affected by the wood type and the number of coats applied.

Use a high-quality brush and apply the stain in the direction of the wood grain. Lightly sand the surface after the first coat has dried to remove any imperfections.