Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are dry and free from anything that will interfere with adhesion. Rub down with abrasive paper and round sharp edges.
- Cleaning: Remove dust after sanding. Timber with oils must be swabbed with methylated spirits.
- Priming: Prime with Sandtex Trade Flexible Primer Undercoat.
- Application: Apply two coats by brush or roller. Allow 16 hours drying time between coats.
Compatibility: This product is compatible with exterior wood and suitably primed metal. It is not designed for use on surfaces not primed appropriately. Ensure the primer is compatible with both the surface and the topcoat.
Care: Clean tools immediately after use with a suitable solvent. Store the product in a cool, dry place, away from direct sunlight. Regularly inspect painted surfaces for any signs of damage, and touch up as needed to maintain protection.