XL Joinery Internal Oak Pre-Finished Palermo 1 Light With Clear Glass - 1981 X 686 X 35mm (27") - White

While the door is suitable for interior use, prolonged exposure to high humidity or steam (e.g., directly above a shower) is not recommended. Good ventilation is advised in such areas.

This door is pre-finished and is not designed to be trimmed. Trimming may void the warranty and compromise the integrity of the door's finish and construction.

The glazed panel is an extended clear glazed panel in the center of the 7-panel design. Specific dimensions for the glass pane itself are not provided, but it is designed to allow light to move between rooms effortlessly.

This product typically includes the door slab only. Hinges, handles, and other necessary hardware need to be purchased separately.

Warranty information is specific to the retailer and manufacturer. Please refer to your purchase documentation or contact XL Joinery for details on the warranty applicable to this product.

Yes, the Palermo family includes panelled and fire door versions, allowing for design continuity throughout your home.

Store the door flat in a dry, well-ventilated area, off the floor, and away from direct sunlight or extreme temperatures to prevent warping or damage.

Check if the frame is square and plumb. The door may need minor adjustments to hinges or the frame might be uneven. Ensure no paint or debris is obstructing the door's path.

Use a dedicated glass cleaner and a clean, lint-free cloth. Ensure you are not using too much cleaner, and wipe dry immediately after application.

Minor scuffs can sometimes be buffed out with a white furniture crayon or a specialized melamine eraser. For deeper scratches, touch-up paint may be required, but matching the factory finish can be challenging.

Apply a small amount of lubricating oil (e.g., WD-40 or a silicone-based lubricant) to the hinge pins. Ensure excess lubricant is wiped away.