Fox Edges Crimp Plyers - CAC793-FX

While they may work with other brands, the jaws are specifically calibrated for the Fox Edges Crimps system to ensure the correct flare and secure holding force.

Yes, the integrated cutting edges are designed to cleanly cut through stiff mono and coated braids used in carp fishing.

The flare allows the hooklink to move freely out of the metal sleeve without hitting a sharp edge, which prevents line breakage under tension.

Apply steady, firm pressure until the pliers reach their full closed position. The stop point is designed to provide the ideal compression force.

They are designed for outdoor use; however, you should keep them dry and lightly oiled to prevent surface corrosion after use in wet conditions.

Ensure you are using the correct size crimp for your specific hooklink diameter and apply firm, even pressure until the pliers are fully closed.

Verify that you are using the tapered section of the jaws to create the flare; if the crimp is not flared, it creates a sharp edge that can damage the line.

Clean any accumulated dirt from the pivot hinge and apply a small amount of lubricant or light machine oil.