Dulux Trade Ultimate Woodstain - Walnut - 5L

You can expect to cover up to 20m² per litre, depending on the wood type and the application method.

No, this product is designed for exterior use only.

It is touch dry within 4-6 hours and recoatable after 16 hours.

No, this product should only be applied by brush or roller.

Clean brushes immediately after use with brush cleaner. Follow the brush cleaner instructions for best results.

This information is not provided in the product details.

For bare wood, it is recommended to apply a suitable basecoat or primer.

Store in a cool, dry place and protect from frost. Ensure the container is sealed tightly.

Ensure the surface is clean, dry, and free from contaminants. Check the temperature and humidity levels, as extreme conditions can affect drying times. Allow sufficient drying time between coats (minimum 16 hours).

Ensure you've stirred the woodstain thoroughly before application. Apply the woodstain evenly, and avoid applying too much product in one area. If necessary, sand lightly between coats.

This often indicates poor surface preparation or incompatibility with the existing coating. Remove the old finish, prepare the surface properly, and apply the woodstain as directed.

Ensure you are applying the correct number of coats. Colour may also vary based on the wood type. Test in a small, inconspicuous area before applying to the entire surface.

Use a high-quality brush or roller. Apply the woodstain in the direction of the wood grain. Avoid over-brushing or over-rolling the product.