Stonelux Brick Coating - Brick Effect Paint - Dark Red - 10 Litre
Best current price£67.26from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£67.26Visit shop B&Q - Brick CoatingBrick Effect PaintDark Red1 Litre
Visit shopB&Q£67.26Visit shop All Offers
8 offers from £67.26 - £320.32
View price history by clicking the chart icon.
B&Q - Brick CoatingBrick Effect PaintLight Red1 LitreFree delivery in 1–3 days£67.26Visit shop →
B&Q - Brick CoatingBrick Effect PaintLight Red5 LitreFree delivery in 1–3 days£180.07Visit shop →
B&Q - Brick CoatingBrick Effect PaintDark Red5 LitreFree delivery in 1–3 days£180.07Visit shop →
B&Q - Brick CoatingBrick Effect PaintMedium Red5 LitreFree delivery in 1–3 days£180.07Visit shop →
B&Q - Brick CoatingBrick Effect PaintDark Red10 LitreFree delivery in 1–3 days£320.32Visit shop →
B&Q - Brick CoatingBrick Effect PaintMedium Red10 LitreFree delivery in 1–3 days£320.32Visit shop →
B&Q - Brick CoatingBrick Effect PaintLight Red10 LitreFree delivery in 1–3 days£320.32Visit shop →
Product Information
Full details
Stonelux Brick Coating is designed for homeowners and DIY enthusiasts looking to refresh or change the appearance of their brickwork. Its key benefit is its ability to seamlessly conceal imperfections and provide a durable, visually appealing finish on both porous and non-porous masonry. A potential caveat is ensuring proper surface preparation for optimal adhesion and longevity.
All features
| Colour | Red |
|---|---|
| Brand | Stonelux |
Extended Product Information
FAQs
Can Stonelux Brick Coating be applied over existing paint?
Yes, provided the existing paint is sound, well-adhered, and clean. Light sanding may improve adhesion.
How many coats of Stonelux Brick Coating are usually needed?
Typically, two coats are recommended for optimal coverage and durability. Always refer to the product's specific instructions for precise guidance.
What is the best way to clean the coated brickwork?
Clean gently with water and a mild soap using a soft cloth or brush. Avoid harsh chemicals or abrasive cleaning methods.
Does the coating seal the brickwork?
While it provides a durable finish, it is formulated to be breathable, allowing moisture vapor to escape from the masonry.
Can I change the color again later?
Yes, the surface can be re-coated with Stonelux Brick Coating in a different color, or a compatible masonry paint, after proper preparation.
What is the drying time between coats?
Drying times can vary based on environmental conditions. Generally, allow at least 4-6 hours between coats, but always consult the product label for specific recommendations.
Troubleshooting
Coating is peeling or flaking.
This is often due to inadequate surface preparation. Ensure the surface was clean, dry, and free from loose material before application. Ensure proper adhesion by re-applying after thorough surface preparation.
Uneven color or coverage.
Apply in consistent, thin coats. Ensure even distribution with the chosen applicator. For subsequent coats, ensure the previous coat is dry but not fully cured to allow for better bonding.
Slow drying time.
Drying times can be affected by temperature and humidity. Ensure application occurs within the recommended temperature range (typically above 5°C and below 25°C) and in well-ventilated conditions.
Pros and Cons
Pros
- Transforms the look of old or undesirable brickwork.
- Provides a durable and long-lasting finish.
- Hides surface imperfections effectively.
- Protects masonry while allowing it to breathe.
- Applicable to a wide range of masonry types.
Cons
- Requires thorough surface preparation for best results.
- Alters the original appearance of the brick, which may not be desired by all.
- Application can be labor-intensive for large areas.
Setup, Compatibility & Care
Surface Preparation:
- Clean the masonry thoroughly to remove all dirt, dust, grease, and loose material. Use a stiff brush or pressure washer.
- Ensure the surface is completely dry before application.
- For very porous surfaces, a suitable primer may be recommended.
Compatibility:
Stonelux Brick Coating is designed for use on most brickwork, including both porous and non-porous masonry. It is not recommended for use on surfaces that are constantly submerged in water or subject to heavy condensation.
Application:
Apply using a brush, roller, or spray applicator. Two coats are typically recommended for full coverage. Allow adequate drying time between coats as per manufacturer instructions.
Care:
Once cured, the surface can be cleaned with water and a mild detergent using a soft brush or cloth. Avoid abrasive cleaners or high-pressure washing, which can damage the coating.