Auto Extreme Grey Primer - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Auto Extreme Grey Primer 1923 is designed for DIY enthusiasts and professionals needing a reliable primer for interior and exterior projects. Its key benefit is excellent coverage and adhesion, ensuring a smooth base for topcoats. A minor caveat is its matte finish, which may require a separate sealant for high-gloss applications.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 1923 |
| Brand | Auto Extreme |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the coverage area for one can?
Coverage varies depending on surface texture and application thickness, but a 400ml can typically covers approximately 1-2 square meters.
Can I use this primer on plastic models?
Yes, this primer is generally suitable for plastic, but it is recommended to test on an inconspicuous area first to ensure compatibility.
How long does the primer need to dry before painting?
Touch dry in approximately 15-20 minutes, and ready for recoating or topcoat application in 1-2 hours, depending on conditions.
Can this primer be used as a final coat?
While it provides a matte finish, it is intended as a primer. For a durable and decorative finish, it should be overcoated with a suitable topcoat.
Is this product suitable for automotive use?
This primer is suitable for general automotive touch-ups and parts, offering good adhesion and coverage. For professional automotive bodywork, specific automotive primers may be recommended.
Does the colour family 'Grey' affect the topcoat colour?
Grey is a neutral primer color that works well under most colors, helping to create a consistent base and enhance the vibrancy of subsequent layers.
Troubleshooting
Uneven spray or sputtering
Shake the can more thoroughly. Ensure the nozzle is clear by inverting and spraying briefly after each use. If blockage persists, try cleaning the nozzle with a solvent-safe cleaner or replace the can.
Poor adhesion or peeling
Ensure the surface was properly cleaned and prepared before application (free from grease, dust, and moisture). Check if the surface is compatible with the primer. Ensure adequate drying time between coats and before applying the topcoat.
Runs or drips
Apply thinner coats from a consistent distance. Avoid applying in excessively humid or cold conditions. If drips occur, allow them to dry fully and then gently sand them down before re-applying.
Pros and Cons
Pros
- Provides excellent coverage for a smooth finish.
- Offers strong adhesion for durability.
- Suitable for a wide range of interior and exterior projects.
- Easy and quick to apply, reducing wasted product.
- CFC-free formulation is an environmentally considerate choice.
Cons
- Matte finish may not be suitable as a final coat without additional treatment.
- Specific performance on highly porous or non-standard surfaces may vary.
- Requires adequate ventilation due to aerosol nature.
Setup, Compatibility & Care
Setup: Ensure the surface to be primed is clean, dry, and free from grease, rust, and loose paint. Shake the can vigorously for at least two minutes before use. Hold the can upright approximately 25-30 cm from the surface. Apply in short, even strokes, overlapping each pass slightly. For best results, apply multiple thin coats rather than one thick coat, allowing a few minutes between coats.
Compatibility: Suitable for use on most common surfaces including wood, metal, plaster, and some plastics. Always test on an inconspicuous area first if unsure. This primer is designed to be overcoated with most types of paint.
Care: After use, invert the can and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight and sources of ignition. Keep out of reach of children.