Best current price£118.00from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£118.00Visit shop Soho Lighting Black Matt 20A 4 Gang Intermediate Toggle Screwless
Visit shop1 offer from £118.00
View price history by clicking the chart icon.
The Soho Lighting Camden Collection Matt Black 4 Gang Intermediate Toggle Switch is designed for users needing to control multiple lighting circuits from a single point, such as in large open-plan areas or multi-level spaces. Its key benefit is simplifying complex lighting setups with four independent switches on one sleek, screwless plate. A potential consideration is the requirement for a double-gang back box of adequate depth for installation. This switch offers robust 20A capacity, a modern matt black finish, and compliance with British Standards.
| Colour | Black |
|---|---|
| Model Part Number | SS-SH-20-LTS314-MBB |
| Brand | Soho Lighting |
This switch requires a standard UK double-gang back box of appropriate depth to accommodate the wiring. Ensure the depth is sufficient before installation.
Yes, the 20A rating makes it suitable for most LED lighting loads. However, always check the compatibility of specific LED bulbs or drivers with multi-gang switching systems.
An intermediate switch allows control of a light from three or more locations. In this case, each of the four toggles acts as an intermediate switch within its respective circuit.
Clean gently with a soft, damp cloth. Avoid harsh chemicals or abrasive materials to preserve the finish.
Yes, it is part of the Soho Lighting Camden Collection, which includes matching sockets, dimmers, and appliance switches for a cohesive look.
This switch is rated at 20 Amps (20A), allowing it to handle significant lighting loads safely.
For wiring configurations or installation help, you can contact sales@hollowaysofludlow.com.
Verify that the power to the circuit is on. Check all wiring connections to ensure they are secure and correct according to the wiring diagram. Confirm the bulb or fixture is functional.
Turn off the power and inspect the wiring for that specific switch. Ensure the toggle mechanism is not obstructed and that connections are firmly made. If the issue persists, the switch unit may need replacement.
Ensure the correct type of double-gang back box is used. Realign the screwless front plate and apply gentle, even pressure until it clicks securely. Check that no debris is preventing a flush fit.
While rated for LEDs, ensure the specific LED driver or bulb is compatible with a 4-gang switch. If using with dimmable LEDs and a separate dimmer switch is not present, this may cause issues. Consult the lighting manufacturer for compatibility advice.
Setup:
Compatibility:
Care:
