Best current price£32.00from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£32.00Visit shop Lieber Black Brushed Copper 3 Gang 2 -Way Intelligent Dimmer 100W Led (250W Halogen/Incandescent) - Size: 146Mm X 86Mm X 2.95 Mm
Visit shop1 offer from £32.00
View price history by clicking the chart icon.
This Lieber 3 Gang 2-Way Intelligent Trailing Dimmer in Brushed Copper is designed for homeowners looking to add a stylish and functional lighting control to their living spaces. Its key benefit is providing versatile dimming for up to three separate lighting circuits, compatible with modern dimmable LED bulbs. A key consideration is that only dimmable LED bulbs will work correctly with this dimmer.
| Colour | Copper |
|---|---|
| Model Part Number | SS-LL-40-LTS203-CBPB |
| Brand | LIEBER |
This dimmer is designed for dimmable LED bulbs (trailing edge compatible) and traditional halogen bulbs. Non-dimmable LED bulbs will not work.
Yes, installation involves mains electrical wiring and should only be performed by a qualified electrician for safety and compliance.
2-Way switching means you can control a light fixture from two different locations, for example, at the top and bottom of a staircase.
Use a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
No, you must only use LED bulbs that are explicitly stated as 'dimmable' and compatible with trailing edge dimmers. Standard LEDs will not function correctly.
The dimmer is rated for a maximum load equivalent to 100W for LED bulbs or 250W for halogen bulbs.
Ensure you are using dimmable LED bulbs specifically rated for trailing edge dimmers. If issues persist, try a different brand or type of compatible dimmable LED bulb.
Check wiring connections to ensure they are secure and correct for a 2-way setup. Verify that the bulbs connected are compatible and functioning correctly on a standard switch.
Some warmth is normal, especially under heavy load. However, if it becomes excessively hot, ensure the total wattage of the connected lights does not exceed the dimmer's rating (100W LED / 250W Halogen equivalent) and that there is adequate ventilation.
Verify that the circuit breaker for the relevant lighting circuit is on and has not tripped. Check all wiring connections, assuming the power has been safely isolated first.
Setup: This dimmer requires installation by a qualified electrician, as it involves mains electrical wiring. Ensure power is isolated before commencing any work.
Compatibility: This dimmer is designed for use with dimmable LED bulbs (trailing edge compatible). It is also compatible with traditional halogen bulbs up to 250W. Crucially, non-dimmable LED bulbs will not function correctly and may cause damage. Always verify that your chosen LED bulbs are explicitly marked as dimmable and trailing edge compatible.
Care: Clean the brushed copper finish with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish. Regular dusting will help maintain its appearance.
