Trade Paints Heavy Duty Floor Paint - White
Best current price£49.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£49.99Visit shop B&Q - Heavy Duty Floor Paint White 2.5L
Visit shopB&Q£49.99Visit shop All Offers
2 offers from £49.99 - £65.99
View price history by clicking the chart icon.
B&Q - Heavy Duty Floor Paint White 5LFree delivery in 1–3 days£65.99Visit shop →
Product Information
Full details
This guide is for anyone looking to protect and revitalize garage, workshop, or industrial floors with Trade Paints Heavy Duty Floor Paint - White. The paint provides a durable, long-lasting finish resistant to wear, tear, and common spills. Keep in mind that this is a solvent-based paint intended for internal use only.
All features
| Colour | White |
|---|---|
| Brand | Trade Paints |
Extended Product Information
FAQs
How much area does one litre of paint cover?
One litre of Trade Paints Heavy Duty Floor Paint covers up to 13 square meters.
Can this paint be used outdoors?
No, this paint is designed for internal use only.
What surfaces can this paint be applied to?
It can be applied to concrete, stone, timber, and suitably primed metal.
How many coats of paint are recommended?
Two coats are generally recommended for optimal protection and durability.
How do I clean the painted surface?
Clean the painted surface with mild detergent and water. Avoid abrasive cleaners.
Is a primer necessary?
Priming is recommended for porous surfaces or metal. Always follow the manufacturer's instructions.
What is the drying time?
The paint is quick-drying, but drying times vary depending on conditions. Refer to the product label for specific details.
What should I do if I spill something on the painted surface?
Clean up spills immediately to prevent staining and damage to the paint finish.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared (clean, dry, and abraded). Use a suitable primer if necessary. Ensure the surface is free of any contaminates such as oil or grease.
Paint is peeling or flaking.
Ensure proper surface preparation. Apply thin, even coats and allow sufficient drying time between coats. Ensure the product is suitable for the surface.
Paint takes too long to dry.
Ensure adequate ventilation. Check the temperature and humidity levels, as these can affect drying times. Apply thin coats.
Paint is not covering the surface adequately.
Apply a second coat of paint. Ensure even application and proper spreading rate.
Paint is reacting with the existing surface.
Ensure the existing surface is fully compatible with solvent-based paints. Spot test in a small area before full application.
Pros and Cons
Pros
- High abrasion resistance for long-lasting protection.
- Resists oil, grease, and many chemical spillages.
- Suitable for various surfaces including concrete, stone, timber, and primed metal.
- Easy to apply due to its single-pack, quick-drying formula.
- Provides an aesthetically pleasing and durable finish.
Cons
- Intended for internal use only.
- May require multiple coats for optimal results.
- Solvent-based, which may require adequate ventilation during application.
- Surface preparation is essential for proper adhesion and performance.
- Limited colour options are available.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, grease, oil, and old paint. Lightly abrade smooth surfaces to improve adhesion.
- Priming (if necessary): For porous surfaces or metal, use an appropriate primer suitable for solvent-based paints.
- Application: Stir the paint thoroughly before use. Apply in thin, even coats using a brush, roller, or spray, following the manufacturer's instructions. Two coats are generally recommended, allowing sufficient drying time between coats.
- Drying Time: Allow the paint to dry completely before use. Drying times vary depending on conditions, but it is typically a quick-drying formula.
Compatibility
- Compatible with concrete, stone, timber, and suitably primed metal.
- Not recommended for use on surfaces exposed to constant water immersion.
Care
- Clean up spills immediately to prevent staining.
- Clean the painted surface with mild detergent and water. Avoid abrasive cleaners.
- Regularly inspect the floor for damage and touch up as needed.