Crown Trade Vinyl Matt - Beige
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Crown Trade Vinyl Matt in Beige is a premium water-based emulsion formulated for interior walls and ceilings, offering a sophisticated, flat, non-reflective finish that hides surface imperfections. It is an excellent choice for both professional decorators and DIY enthusiasts looking for high opacity and a smooth, consistent application; however, users should note that the flat matte finish is less scrubbable than high-sheen alternatives, making it best suited for low-traffic areas.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 0603728361561 |
| Brand | Crown Trade |
Extended Product Information
FAQs
Is this paint suitable for kitchens or bathrooms?
It is not recommended for areas with high humidity or moisture, as the matte finish is not designed for frequent scrubbing or steam resistance.
Can I use this on wood or metal surfaces?
No, this is specifically formulated for interior walls and ceilings. Use dedicated metal or wood paints for those surfaces.
How many coats are typically required?
Due to its high opacity, two coats are usually sufficient for a perfect finish, provided the surface is properly prepared.
How long does it take to dry?
It is quick-drying, typically touch-dry within 1 to 2 hours, though recoat times can vary based on temperature and humidity.
Is the finish washable?
The finish is delicate; while it can be wiped with a slightly damp cloth, it is not considered a 'scrubbable' or 'washable' paint like a satin or vinyl silk.
Do I need to thin the paint?
For standard application, thinning is not required. Only thin with water if applying a mist coat to fresh plaster.
Troubleshooting
Visible roller marks or streaking
Ensure you are using a high-quality roller and do not stretch the paint too far; maintain a wet edge and keep the roller sufficiently loaded.
Paint peeling or flaking shortly after application
This is often caused by applying paint to a dirty or dusty surface. Sand the area, clean thoroughly, and re-prime before reapplying.
Uneven color or 'flashing'
This usually occurs when applying to a porous surface without a primer or mist coat. Ensure the substrate is properly sealed before painting.
Pros and Cons
Pros
- Delivers a professional-grade, smooth matte finish
- Easy to clean up tools with water
- High opacity provides great coverage
- Quick drying allows for rapid project turnaround
- Ideal for disguising wall texture and imperfections
Cons
- Matte finish is less resistant to scrubbing and stains
- Not recommended for high-moisture areas like bathrooms
- Limited to interior applications only
Setup, Compatibility & Care
Before starting, ensure surfaces are clean, dry, and free from dust or grease. If applying over fresh plaster, use a suitable mist coat (a diluted mixture of paint and water) to prevent the paint from soaking in unevenly. Use high-quality synthetic brushes or medium-pile rollers for the best results. During application, maintain a wet edge to avoid overlapping marks. Once finished, clean your equipment immediately with warm, soapy water. To maintain the wall finish, avoid abrasive cleaning methods; instead, lightly dust or wipe with a soft, damp cloth if marks appear, taking care not to rub too hard on the matte surface.