Rust-Oleum Bathroom Wall & Ceiling Paint - Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners seeking to refresh their bathrooms with a durable, water-resistant paint. Rust-Oleum Bathroom Wall & Ceiling Paint provides a beautiful, modern matt finish while resisting moisture and condensation. Note that this paint is not suitable for shower enclosures or areas in constant contact with water.
All features
| Colour | Red |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much area does a 2.5L tin cover?
A 2.5L tin covers approximately 12m2 per litre.
Can I use this paint in a shower?
No, this paint is not suitable for shower enclosures or areas with constant water contact.
What is the drying time between coats?
Please refer to the product label for specific drying times. This may vary depending on the environment.
How do I clean the painted surface?
Use a damp cloth and mild soap. Avoid using abrasive cleaners.
Is this paint water-based?
Yes, it is a water-based paint.
What kind of finish does this paint have?
It has a modern matt finish.
Can I apply this paint over existing paint?
Yes, you can apply it over previously painted walls if the existing paint is in good condition and properly prepared.
Troubleshooting
Paint is peeling or cracking.
Ensure proper surface preparation before application. Remove any loose paint and clean the surface thoroughly.
Paint not adhering properly.
Make sure the surface is clean, dry, and free of any contaminants. Lightly sand glossy surfaces.
Color not as expected.
Always use a tester sachet before applying to the entire surface. Ensure proper mixing of the paint.
Pros and Cons
Pros
- Water-resistant formula protects against moisture.
- Available in a wide range of colors for customization.
- Easy to apply with brush or roller.
- Durable and long-lasting.
- Low odor for a more pleasant application experience.
Cons
- Not suitable for shower enclosures or areas with constant water contact.
- Requires two coats for best results.
- May require more than one tin depending on the size of your space
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Wash the surface with a suitable cleaning solution.
- Application: Stir the paint thoroughly before use. Apply two even coats using a brush or roller, allowing sufficient drying time between coats (as indicated on the product label).
- Compatibility: Suitable for use on new or previously painted plaster, brick, or concrete walls and ceilings.
- Care: Clean spills immediately. For cleaning, use a damp cloth and mild soap. Avoid abrasive cleaners.