Beldray Duo Glide Steam Iron - BEL01480-150

Unplug the iron and open the water filling inlet. Fill the tank with clean water up to the maximum fill line indicated.

Press the steam shot button for a burst of steam. This is useful for removing stubborn creases. Ensure the iron is at a suitable temperature.

Use the anti-drip feature and allow the iron to reach the correct temperature before using steam. Avoid overfilling the water tank.

Clean the soleplate after each use. Use the anti-calc function regularly (as per the user manual) to prevent limescale buildup, which can affect performance.

It is best to use tap water. However, if you live in an area with very hard water, you may want to use distilled or demineralized water to reduce limescale buildup.

Check the soleplate for residue and clean it with a soft, damp cloth. Ensure you are using the correct temperature setting for the fabric. Also, make sure that the iron is not too hot for the fabric type.

The user manual is usually included with the product packaging. It is also often available on the manufacturer's website.

Check the power connection and ensure the iron is plugged in correctly. Check the temperature setting; it might be set too low. Allow sufficient time for the iron to heat up.

Ensure the temperature setting is appropriate for steam ironing. If the temperature is too low, the water might not be converting to steam. Make sure the water tank is not overfilled. Check the anti-drip feature is functioning correctly.

Ensure the water tank has sufficient water. Check that the steam control is activated. Allow the iron to reach the set temperature before using the steam function. Descale the iron if necessary.

Use the anti-calc feature regularly as per the instructions. Regularly clean the soleplate with a damp cloth.