Muriva Elixir Marble Grey and Gold Wallpaper - Grey / Gold

This wallpaper uses the 'paste-the-paper' application method. You apply the adhesive directly to the wall before hanging the wallpaper strips.

Yes, it is a wipeable wallpaper. You can easily clean it by gently wiping with a damp, soft cloth.

It has an offset design match with a repeat of 53cm, meaning subsequent strips need to be shifted to align the pattern.

Each roll has a length of 10.05 meters and a width of 53 centimeters.

The metallic inks create a subtle, shimmering effect on parts of the marble pattern, adding depth, movement, and a luxurious touch that catches the light.

While the wallpaper is wipeable, specific information regarding its suitability for high-humidity environments like bathrooms is not provided. For best results and longevity, ensure good ventilation if considering it for such an area.

Yes, comprehensive hanging instructions are printed on the back of the wallpaper label for your convenience.

Ensure the wall surface was properly prepared (clean, dry, smooth, and primed if necessary). Verify that you used a suitable, good-quality 'paste-the-paper' adhesive and applied it evenly to the wall.

The wallpaper has a 53cm offset design match. Before applying adhesive, hold the dry strip against the previously hung strip on the wall to locate the precise match. Cut and apply carefully, taking your time to align the pattern.

Immediately after hanging, use a wallpaper brush or smoother to gently push any air bubbles or wrinkles towards the edges of the strip. Work from the center outwards. If a bubble persists, you might need to carefully lift a small section and re-smooth it.

Ensure strips are butt-joined (edges touching without overlapping) and smoothed down firmly. If seams are gapping, check that the wall was adequately pasted and that the strips weren't stretched during application. Proper acclimatization of the wallpaper roll to room temperature before hanging can also help.

Ensure the room lighting is adequate to highlight the metallic inks. The effect is designed to subtly catch light, so different angles and light sources will show varying levels of shimmer. Avoid harsh cleaning agents, which could dull the finish over time.