Flymo SimpliCut 450 Cordless Hedge Trimmer - 45cm Blade - 18V

With the included 2.0Ah battery, you can expect to trim hedges up to 140m². Actual runtime can vary based on hedge density and cutting conditions.

The SimpliCut 450 has a blade gap of 15mm, making it suitable for branches up to that thickness.

It is always recommended to wear appropriate safety gloves for better grip and protection when operating hedge trimmers.

Clean the blades with a damp cloth after each use. For optimal performance, the blades should be sharpened periodically. Apply a light lubricant to prevent rust during storage.

This trimmer is designed for the Flymo 18V battery system. While other 18V batteries might physically fit, using non-Flymo branded batteries may void your warranty and could lead to performance issues or damage.

Please refer to the product documentation or the manufacturer's website for the most up-to-date warranty information for your region.

The dual-trigger system requires you to simultaneously press and hold two separate triggers (usually one on the handle and one on the loop handle) to start the trimmer. This is a safety feature to prevent accidental starting.

Ensure the battery is fully charged and correctly inserted. Check that both safety triggers are engaged simultaneously before pressing the main power button.

Clean the blades thoroughly. Ensure the blade gap is not obstructed by debris. Sharpen the blades if they appear dull. Avoid attempting to cut branches thicker than 15mm.

Check that the charger is properly plugged in and that the battery is securely connected to the charger. Ensure the battery terminals are clean. If the issue persists, the battery or charger may need service.

The battery may be depleted; attempt to recharge it. Check for any jams or blockages in the blades that might cause the motor to overload. Allow the tool to cool down if it feels excessively hot.