Aspire Easymount Wall Mounted Upholstered Panels - Plush Velvet Fabric, Ebony (Pack Of 2)

While some repositioning may be possible immediately after application if done very carefully, the adhesive is designed for a strong, long-term bond. It is best to plan your layout meticulously before installation. Attempting to remove and reapply may damage the panel or the wall surface.

The number of panels required depends on your desired headboard size and orientation. A standard queen bed is approximately 60 inches wide. Two panels side-by-side are about 61 inches wide (762mm x 2 = 1524mm, which is ~60 inches). You may need additional panels for height or a wider design.

The panels are upholstered and padded, not waterproof. They are not designed for use in bathrooms or areas with high humidity or direct water exposure.

For light cleaning, use a slightly damp cloth. For stains, use a mild upholstery cleaner, testing on a small, hidden area first. Avoid soaking the fabric or padding.

These panels are not designed to be cut. Cutting would expose the internal padding and backing material, compromising the aesthetic and durability.

Please refer to the retailer's specific return policy for details on returns due to adhesion issues, as this can depend on the reason for the failure (e.g., surface preparation vs. product defect).

Yes, the Aspire Easymount panels are available in a variety of colors and fabric types, such as Cream, Beige, Grey, Silver, Green, and Pink, often with different upholstery finishes.

Ensure the wall surface is perfectly clean, dry, and smooth. Re-apply pressure to the panel, focusing on edges. If the issue persists, the surface may not be suitable, or the adhesive may have lost tack; consider a suitable wall-safe adhesive if needed.

Use a spirit level during installation. Plan your layout carefully before applying, and consider using painter's tape to create guide lines on the wall.

Gently remove residue with a damp cloth or a specialized adhesive remover suitable for painted surfaces. Test in an inconspicuous area first.

Ensure firm, even pressure was applied during installation to maximize adhesive contact. Check for any underlying wall damage or unevenness.