Buster + Punch 1G Toggle Switch - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to understand and install the Buster + Punch 1G Toggle Switch. This stylish switch provides a premium feel and aesthetic upgrade to your home's light fixtures. However, it requires a specific back box for installation.
All features
| Colour | Black |
|---|---|
| Model Part Number | 1G |
| Brand | Buster + Punch |
Extended Product Information
FAQs
What tools do I need for installation?
You'll need a screwdriver, wire strippers, and a voltage tester (to ensure power is off).
Can I use this switch outdoors?
No, this switch is for indoor use only.
What type of back box is required?
A 70mm x 70mm back box with a 47mm recess depth.
What is the warranty on this switch?
Please refer to the product packaging or retailer for warranty information.
Can I use this switch with LED lights?
Yes, this switch is compatible with LED lighting.
How do I remove the switch plate?
Unscrew the signature metal coin screws to remove the faceplate.
Troubleshooting
Switch does not work after installation.
Double-check wiring connections, ensure the circuit breaker is on, and verify the light bulb is functioning.
Switch feels loose.
Tighten the screws securing the switch to the back box.
Switch sparks when turned on.
Immediately turn off the power at the breaker and check wiring for any loose connections or exposed wires. Consult a qualified electrician if needed.
Pros and Cons
Pros
- Premium build quality and aesthetic appeal.
- Unique design details like the knurled toggle and coin screws.
- Available in a range of finishes to match various interior styles.
- Durable and long-lasting due to solid metal construction.
- Easy to install (given correct back box).
Cons
- Requires a specific back box (70mm x 70mm with 47mm recess depth).
- Installation may require some electrical knowledge.
- May be more expensive than standard switches.
Setup, Compatibility & Care
Setup:
- Ensure the power is switched off at the circuit breaker before beginning installation.
- This switch requires a 70mm x 70mm back box with a 47mm recess depth. Install or ensure the correct back box is in place.
- Connect the wires according to the wiring diagram (ensure you understand the wiring before starting).
- Secure the switch to the back box with the provided screws.
- Turn the power back on and test the switch.
Compatibility:
- Voltage: 230v - 240v AC
- Amperage: 10 Amp
- Back Box: Requires a 70mm x 70mm back box with 47mm recess depth.
- Use: Indoor use only, Class 1, Earthed.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners.