V33 High Protection Wood Stain, 750Ml - Brown

Drying times vary depending on temperature and humidity, but generally, allow several hours between coats, and a day for full curing. Refer to the product label for specific recommendations.

For optimal protection and colour, apply two coats, allowing the first coat to dry completely before applying the second.

It is generally recommended to remove any existing finishes. Proper surface preparation is essential for adhesion and performance.

A brush or a suitable applicator is recommended for applying the stain evenly. Follow the wood grain.

Clean tools immediately after use with a suitable solvent. Dispose of the used materials in accordance with local regulations.

While it's compatible with most types of wood, it's always best to test on a small, inconspicuous area first.

Check the product label for the expiration date. Store the product properly in a cool, dry place to extend its shelf life.

Ensure the surface is clean, dry, and properly prepared. Sand the surface to improve adhesion.

Ensure even application and stir the stain well before use. Apply a second coat if necessary.

The surface was not properly prepared, or the stain was applied too thickly. Remove the old stain, prepare the surface and reapply with thinner coats.