Best current price£25.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£25.99Visit shop B&Q - Heavy Duty Expanding Foam 340Ml2 PackFast-CuringMulti-Purpose Sealant For Gaps & Cracks
Visit shop1 offer from £25.99
View price history by clicking the chart icon.
This Gorilla Heavy Duty Expanding Foam is designed for DIY enthusiasts and professionals needing to quickly fill, seal, and insulate gaps, cracks, and cavities. Its fast-curing, heavy-duty formula provides a durable, weather-resistant seal that improves energy efficiency. While versatile for many indoor and outdoor applications, users should be aware that its expansion can be significant and may require trimming.
| Colour | White |
|---|---|
| Brand | Gorilla |
The foam expands significantly to fill approximately twice the volume of the gap it is applied to. It's recommended to fill gaps only about 50% full to prevent over-expansion.
Yes, once fully cured, the foam can be trimmed and painted to match the surrounding surface. Ensure the paint is suitable for use on polyurethane foam.
Yes, this heavy-duty expanding foam is suitable for both indoor and outdoor applications and provides a weather-resistant seal.
Store unused cans upright in a cool, dry place, away from direct sunlight and heat. Ensure the nozzle is removed and the valve is clean. Follow specific storage temperature guidelines on the can.
Wear gloves, eye protection, and long sleeves when applying. Ensure good ventilation during and after application. Avoid inhaling the fumes and do not expose to open flames or sparks.
Uncured foam can be cleaned from surfaces and tools using a solvent specified on the product label. For skin contact, wash immediately with soap and water.
The foam adheres well to wood, metal, concrete, masonry, and most building materials. Lightly misting surfaces with water can improve adhesion.
Ensure the can is shaken thoroughly. Check if the nozzle is clear and properly attached. If the can is cold, warm it slightly by soaking in warm water (do not overheat). Ensure the trigger mechanism is fully engaged.
Do not fill gaps more than 50%. Apply in layers if the gap is very deep. Ensure the surface is not excessively wet, as this can accelerate expansion. Trim excess foam once fully cured.
Protect surrounding areas with drop cloths or tape before application. If uncured foam contacts skin or surfaces, clean immediately with a suitable solvent as recommended on the product label.
Ensure adequate ventilation. Humidity and temperature can affect curing times; refer to the product instructions for optimal conditions. Very low temperatures will slow curing.
Setup:
Compatibility:
This foam is suitable for use on wood, metal, concrete, masonry, and most common building materials. It can be used for both indoor and outdoor applications.
Care:
