D-C-Fix Self Adhesive Film - Blackwood Woodgrain - Black

Spruce up and give your furniture a refresh with this black woodgrain effect self adhesive film. d...

Best current price£8.00from eBay

All Offers

15 offers from £8.00 - £15.95

View price history by clicking the chart icon.

eBayVINYL DCFIX VINYL WOODGRAIN 67.5cm wide MAKEOVER BLACK WOOD STICKY BACK PLASTIC
Free delivery in 1–3 days
£8.00
Visit shop
B&QB&Q - Makeover Blackwood Woodgrain Self Adhesive Vinyl Stickyback Wrap Fablon 2M X 45Cm
Free delivery in 1–3 days
£8.99
Visit shop
OnBuy.comD-C-Fix Deco Classic Black Wood Effect Grain Self Adhesive Vinyl Film 2M X 45Cm 4007386040220
Free delivery in 1–3 days
£15.95
Visit shop

Product Information

Full details

This guide helps you understand and effectively use the D-C-Fix Blackwood Woodgrain Effect Self-Adhesive Film. Ideal for refreshing furniture with a stylish woodgrain look, it offers an easy-to-apply, removable adhesive solution. However, precise measurement and careful application are key to achieving the best results. This guide covers features, usage, and care to ensure a successful application.

All features

ColourBlack
Model Part NumberF3465015
Brandd-c-fix

Extended Product Information

FAQs

Can this film be used outdoors?

No, this film is designed for indoor use only.

Is the film waterproof?

It is water-resistant but not fully waterproof. Wipe spills immediately.

Can I reposition the film after application?

Yes, the removable adhesive allows for repositioning during application. However, repeated repositioning may reduce the adhesive's effectiveness.

What tools do I need to apply the film?

You'll need a measuring tape, scissors or a utility knife, a smoothing tool or a soft cloth, and a ruler or straight edge.

How do I remove the film?

Gently lift an edge and slowly peel the film away from the surface. If the adhesive is difficult to remove, try warming the film with a hairdryer to soften the adhesive.

What surfaces is this film suitable for?

It is suitable for smooth, non-porous surfaces like wood, laminate, and metal.

Troubleshooting

Air bubbles under the film

Lift the film and reapply, smoothing out the bubbles with a smoothing tool or soft cloth. For small bubbles, you can prick them with a pin and smooth them out.

Film not sticking properly

Ensure the surface is clean, dry, and smooth. Apply firm pressure when smoothing the film. If necessary, use a primer designed for self-adhesive films on difficult surfaces.

Edges lifting

Trim any excess film. Apply heat (such as from a hairdryer) to the edges to help the adhesive bond. Press the edges firmly to the surface.

Pros and Cons

Pros

  • Easy to apply, making it a great option for DIY projects.
  • Provides a stylish and realistic woodgrain finish.
  • Removable adhesive allows for repositioning and easy removal without damaging surfaces.
  • Cost-effective way to refresh furniture and decor.

Cons

  • Requires careful measurement and cutting for precise application.
  • Air bubbles can form if not applied smoothly, which may require repositioning.
  • The adhesive may not be suitable for all types of surfaces.
  • Edges may lift over time, particularly in high-use areas.

Setup, Compatibility & Care

  1. Preparation: Clean the surface thoroughly. Ensure it's smooth, dry, and free of dust or grease.
  2. Measurement: Measure the surface accurately and cut the film, leaving a slight overlap.
  3. Application: Peel off a small section of the backing and align the film. Smooth out air bubbles as you apply the film, working from the center outwards.
  4. Tools: Use a smoothing tool or a soft cloth to press the film firmly onto the surface.
  5. Compatibility: Suitable for most smooth, non-porous surfaces. Test in an inconspicuous area if unsure.
  6. Care: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.

Similar items

Price History

DatePrice
Visit shop