Soho Lighting Toggle Switch - Bronze - 20A 2 Gang 2 Way

'20A' indicates the amperage rating, suitable for higher loads. '2 Gang' means there are two switches on the plate. '2 Way' means each switch can control a light from two different locations (e.g., top and bottom of stairs).

This is a standard toggle switch. While it can be used with LED lights, it is not a dimmer. Ensure your LED system is compatible with standard on/off switching. For dimming LEDs, a dedicated dimmer switch is required.

Use a soft, damp cloth. Avoid abrasive cleaners or solvents to protect the unique hand-finished patina.

No, the subtle variations in texture and colour are a natural characteristic of the hand-finished bronze, enhancing the product's unique charm and authenticity.

A standard UK back box is required. A minimum depth of 25mm is recommended for screwless fittings to ensure proper clearance and fitting.

While possible, this switch is designed to complement other items within the Soho Lighting Bronze range for a cohesive look. Mixing finishes can create a contrast, depending on your interior design goals.

Please refer to the retailer's specific warranty information for this product. Soho Lighting typically offers a warranty on their fittings, but terms can vary.

Ensure the circuit breaker is on. Verify all wiring connections are secure. If using 2-way switching, check the wiring at both switch locations. Consult a qualified electrician if unsure.

This may indicate an issue with the internal mechanism or improper installation. Contact a qualified electrician for inspection and potential replacement.

This is normal due to the hand-finished nature of the product. Each piece is unique. If the inconsistency is severe or you believe it's a defect, contact your supplier.

Ensure the back box is securely mounted to the wall and the faceplate clips are properly engaged. If the issue persists, the back box may need securing or the switch unit re-fitting by an electrician.