Best current price£21.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£21.99Visit shop B&Q - Daylight Roller Blinds With Metal FittingsRed Trimmable Blind For Windows And Doors (W)60Cm (L)165Cm
Visit shop3 offers from £21.99 - £46.99
View price history by clicking the chart icon.
The Furnished Daylight Roller Blinds in Red are designed for homeowners looking to soften natural light while adding a vibrant splash of color to their interior spaces. These blinds offer excellent light filtration for living areas and bedrooms, providing privacy without completely blacking out a room. Please note that the actual fabric width is 4.5cm narrower than the total installed width to accommodate the mechanical fittings, which is a critical consideration for precise window measurements.
| Colour | Red |
|---|---|
| Model Part Number | AMCLDLTDRB065 |
| Brand | FURNISHED |
Yes, the total width of the fabric is 4.5cm less than the width of the metal fittings combined to allow for the control chain and pin-end mechanisms.
Yes, these blinds are suitable for both inside and outside recess mounting, provided you have sufficient depth for the brackets.
They are designed for standard indoor use. They should not be installed in high-humidity areas like bathrooms or directly above kitchen sinks where water contact is frequent.
You will typically need a pencil for marking, a power drill, wall plugs and screws (appropriate for your wall type), and a screwdriver.
The mechanism is generally side-specific based on the bracket design; ensure you confirm your preferred orientation before mounting the brackets.
Check that the brackets are level and the fabric is not catching on the metal fittings. You may need to add a small strip of tape to the roller tube on the side that hangs higher to level the roll.
Ensure the blind is mounted perfectly level. If the brackets are skewed, the roller cannot spin freely.
Check that the blind was trimmed straight. Use a sharp utility knife or fabric scissors to clean up any loose threads.
Installation requires standard household tools including a drill, screwdriver, and measuring tape. Before mounting, subtract 4.5cm from your total window width to determine the fabric size. For care, gently dust the blinds with a microfiber cloth or use a vacuum with a soft brush attachment on a low setting. If a spot stain occurs, dab the area with a slightly damp cloth and a mild soap solution; avoid soaking the fabric to prevent watermarks or damage to the internal roller spring.
