JG Speedfit Monobloc Flexible Connector Hose - 15mm x M10 male
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a female mixer tap. ...Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a female mixer tap. This hose is ideal for the connection to monobloc mix taps. To make a connection simply push the fitting fully on to the pipe and screw the thread into the bloc. The hose has off set spanner locations to ease installation. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Easy to install, Suitable for use in confined places, No tool installation, Works very well in confined spaces and removes the need for on-site hot works, Needs its own pipe inserts to work optimally, Not suitable for central heating systems, WRAS approved, Conforms to BS 7291, Kitemarked to KM39767. John Guest Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The John Guest Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture. Flexible design makes installation hassle free. Safe flame-free installation, with no hot works, glue or flux. Braided stainless steel outer layer protects the internal feed from damage. Grip & Seal collet with stainless steel teeth and main O-Ring seal. Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe. Suitable for hot and cold water only (6 Bar @ 65 °C).
This guide helps plumbers and DIY enthusiasts understand and effectively use the JG Speedfit Monobloc Flexible Connector Hose. This hose simplifies connecting plastic and copper pipes to a female mixer tap, saving time and effort. Note that while this hose is easy to install, it requires specific pipe inserts for optimal performance with plastic pipes.
All features
Model Part Number
FLX28
Brand
JG Speedfit
Extended Product Information
FAQs
What is the primary use of this hose?
Connecting plastic and copper pipes to a female mixer tap.
Do I need any special tools for installation?
No, the push-fit design allows for installation without tools.
What types of pipes is this hose compatible with?
It is compatible with 15mm copper and Speedfit PEX and polybutylene plastic pipes (with inserts).
Is this hose suitable for central heating systems?
No, it is not suitable for central heating systems.
What is the maximum operating temperature?
65 °C.
Is this hose WRAS approved?
Yes, it is WRAS approved.
How do I remove the hose if needed?
Push the collet towards the body of the fitting and pull the pipe.
What should I do if the hose is leaking?
Check the connections, ensure they are fully engaged, and tighten if necessary. Also, inspect for any damage.
Troubleshooting
The hose is leaking at the connection.
Ensure the fitting is fully pushed onto the pipe and that the connection is properly tightened. Check for any damage to the pipe or fitting.
The fitting is difficult to remove.
Push the collet towards the body of the fitting and pull the pipe to release it.
The hose doesn't fit properly.
Make sure you have the correct size hose and that you're using the right pipe inserts for plastic pipes.
Pros and Cons
Pros
Easy and quick installation, reducing installation time by up to 40%.
No tools or hot works needed, enhancing safety and convenience.
Ideal for use in confined spaces.
Compatible with both plastic and copper pipes.
Durable and reliable construction.
Cons
Requires pipe inserts when used with plastic pipes.
Not suitable for central heating systems.
Specific to monobloc mixer taps.
May require more initial setup knowledge compared to traditional methods.
Setup, Compatibility & Care
Setup:
Ensure the water supply is turned off.
Cut the pipe to the required length.
If using plastic pipe, insert the correct manufacturer’s pipe insert.
Push the fitting fully onto the pipe until it clicks.
Screw the threaded end into the female mixer tap.
Turn the water supply back on and check for leaks.
Compatibility:
Compatible with 15mm copper and Speedfit PEX and polybutylene plastic pipes.
Requires pipe inserts for plastic pipes.
Suitable for hot and cold water (up to 6 Bar @ 65 °C).