CCJH Sliding Barn Door Hardware - 6Ft/182Cm - Stainless Steel - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This CCJH 6FT sliding barn door hardware kit is designed for homeowners looking to add a stylish, space-saving solution to their interiors. It offers a durable stainless steel construction for smooth, reliable operation. A potential consideration is ensuring your door's width and thickness meet the specified requirements for optimal fit and performance.
All features
| Colour | Silver |
|---|---|
| Brand | CCJH |
Extended Product Information
FAQs
What is included in the kit?
The kit includes the 6FT/1.8M stainless steel track, rollers, door stops, floor guide, and all necessary mounting hardware. The door panel itself is not included.
Can this hardware be used for exterior doors?
This kit is primarily designed for interior use. While durable, it may not be suited for harsh weather conditions experienced by exterior doors.
What is the maximum door width this kit supports?
The 6FT/1.8M track is suitable for a single door with a maximum width of 3FT/0.9M.
How do I clean the stainless steel hardware?
Use a soft, damp cloth to wipe down the stainless steel components. Avoid harsh chemicals or abrasive scrubbers that can damage the finish.
What type of wall is best for installation?
The hardware should be mounted directly into wall studs for maximum stability and weight-bearing capacity. If studs are not accessible at the desired location, use heavy-duty drywall anchors specifically rated for significant weight.
Is the track length adjustable?
The track comes in a fixed 6FT/1.8M length. It cannot be easily shortened or extended, so ensure this length is appropriate for your installation.
What is the warranty period?
The product comes with a 5-year manufacturer's warranty.
Troubleshooting
Door is difficult to slide or jerky.
Check if the track is perfectly level and securely mounted. Ensure there are no obstructions on the track. Verify the door rollers are correctly seated and not damaged. Clean the track and rollers.
Hardware makes excessive noise.
Ensure all mounting screws are tight. The noise might indicate dry rollers; apply a small amount of silicone lubricant to the roller bearings. Check for any debris in the track.
Door does not stop at the desired positions.
Adjust the position of the door stops on the track. Make sure the door stops are securely tightened to prevent movement.
The track appears to be sagging.
Confirm the track is properly supported by wall studs or appropriate wall anchors. Add additional support brackets if necessary, especially for longer tracks or heavier doors. Ensure maximum door weight capacity is not exceeded.
Pros and Cons
Pros
- Durable and corrosion-resistant stainless steel build.
- Smooth and quiet door operation.
- High weight capacity supports most standard doors.
- Versatile aesthetic suits various interior styles.
- Comprehensive kit simplifies installation.
- Long 5-year warranty provides security.
Cons
- Door itself is not included.
- Requires specific door thickness (3.5cm-4cm / 1.37"-1.57").
- Track length limits the maximum door width.
- Installation may require basic DIY skills and tools.
Setup, Compatibility & Care
Setup:
- Ensure you have a solid wall capable of supporting the weight of the door and hardware.
- Measure your door and wall space carefully to confirm compatibility.
- Follow the included instructions to mark mounting points for the track.
- Securely attach the track to the wall using appropriate fasteners (ensure they are suitable for your wall type).
- Attach the rollers to your door panel.
- Hang the door onto the track and install any additional accessories like the floor guide and door stops.
Compatibility:
- Door Width: Maximum 3FT/0.9M for a single door.
- Door Thickness: Fit wood door thickness between 3.5cm-4cm (1.37"-1.57").
- Door Weight: Maximum 100kg (220lbs) per door.
- Material: Primarily designed for wood doors. Ensure door is robust enough to support roller hardware.
Care:
- Clean the stainless steel components regularly with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface.
- Periodically check that all screws and bolts are tight to ensure continued smooth operation.
- Lubricate the rollers and track sparingly with a silicone-based lubricant if any stiffness is detected over time.