Okuma Azaki Spinning Reel - 30

The Azaki Spinning Reel - 30 is designed for general fishing use and is ideal for beginners. It performs well in freshwater and light saltwater environments for various species.

This model comes pre-spooled directly from the Okuma factory with 20lb braided fishing line.

After each use, rinse the reel with fresh water, especially if used in saltwater. Wipe it dry with a soft cloth. Avoid submerging the reel.

Yes, the handle is designed to be reversible, allowing for both right-hand and left-hand retrieve.

CFR stands for Cyclonic Flow Rotor Technology. It enhances airflow around the rotor, which helps the reel dry faster and reduces corrosion.

A gear ratio of 5.0:1 means that for every full rotation of the handle, the spool will rotate 5.0 times. This offers a balance between retrieve speed and power.

The Okuma Azaki Spinning Reel - 30 is equipped with 1 ball bearing and 1 roller bearing for smooth operation.

Rinse the reel thoroughly with fresh water to remove any debris or salt. Check for any obstructions around the spool or handle. If the issue persists, it may require lubrication or professional servicing.

Ensure the bail is fully open and the line is routed correctly through the guides. Check for any tangles or knots on the spool. If using the pre-spooled line, verify it was spooled evenly.

Inspect the drag washers for wear or damage. Ensure the drag knob is tightened appropriately. If the drag washers are old or damaged, they may need to be replaced. For multi-disc Japanese oiled felt washers, ensure they are properly oiled as per manufacturer recommendations.

Verify that the Quick-Set infinite anti-reverse lever is in the 'ON' position. Check for any debris preventing the anti-reverse mechanism from engaging. If the problem persists, the anti-reverse system may need inspection or repair.