Setup, Compatibility & Care
Installation Steps
- Unpack: Carefully remove the new HP Yellow Ink Cartridge from its packaging. Avoid touching the electrical contacts or nozzles.
- Open Printer Access: Open the ink cartridge access door on your HP PageWide Enterprise printer. Refer to your printer's manual for exact instructions.
- Remove Old Cartridge: If replacing an existing cartridge, gently press the old yellow cartridge inward to release it, then pull it out.
- Insert New Cartridge: Align the new yellow cartridge with its corresponding slot and push it in firmly until it clicks into place. Ensure it is seated correctly.
- Close Access Door: Close the ink cartridge access door. The printer will typically perform a short calibration or preparation cycle.
Compatibility
This HP Yellow Ink Cartridge (J3M70A) is designed for use only with the following HP PageWide Enterprise printer models:
- HP PageWide Enterprise Color MFP 586
- HP PageWide Managed Color E55650
Using this cartridge in incompatible printers will result in non-functionality and may cause damage to the printer.
Storage and Care
- Store Properly: Keep unused cartridges sealed in their original packaging until ready for use. Store them in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handle Gently: Avoid dropping or shaking cartridges excessively, as this can affect ink distribution.
- Recycle Responsibly: When a cartridge is empty, consider participating in HP's recycling program to minimize environmental impact.