Cuprinol Ducksback Exterior Fence & Shed Treatment Wood Paint - Rich Cedar

This treatment is formulated to provide durable weather protection for up to 5 years on exterior fences and sheds.

No, this product is specifically designed for exterior fences and sheds. It is not recommended for decking or garden furniture due to high traffic or direct skin contact, which could lead to colour transfer or insufficient durability for such applications.

A 5L tin will cover approximately 25 square meters with one coat, based on an average coverage of 5 square meters per litre. Actual coverage may vary depending on the wood's porosity and condition.

The treatment typically dries within 2-4 hours, allowing for quick re-coating or project completion.

Yes, for best results, ensure the wood surface is clean, dry, and free from loose material, dirt, mould, or algae before application.

The product description states application by brush or roller. If considering a spray gun, always refer to the specific instructions on the product packaging for suitability and proper setup. Info needed: [check product label for spray gun compatibility].

'Rich Cedar' is a warm, attractive brown shade that enhances the natural appearance of your wood with a consistent, appealing colour.

Ensure the product is thoroughly stirred before and during use. Apply evenly along the wood grain. Uneven or very porous wood may require an additional coat for a consistent finish. Avoid over-brushing.

Check ambient temperature and humidity. Drying times can be extended in cold, damp, or humid conditions. Ensure adequate ventilation if possible. Avoid applying too thickly.

This often indicates insufficient surface preparation. Ensure the wood surface is clean, dry, and free from loose material, dirt, or grease before application. Remove any flaking previous coatings entirely before reapplying.

The stated coverage is an average; very porous or rough-sawn timber will absorb more product and reduce coverage. Ensure you are applying at a consistent thickness. Consider a slightly thicker application on highly absorbent areas.

While the treatment protects the wood, it doesn't contain specific fungicides for surface growth. Clean the affected area thoroughly with a suitable fungicidal wash or cleaner before reapplying the treatment, especially if the issue persists in damp, shaded areas.