Professional Pruner - Darlac DP30

The Darlac DP30 Professional Pruner has a maximum cut capacity of 25mm (approximately 1 inch) in diameter.

The blade tension is adjusted via the central pivot bolt. You can tighten or loosen it by turning the bolt or its corresponding nut. Aim for a smooth cutting action without excessive force or blade play.

While designed with a primary ergonomic profile, the pruner can be used by left-handed individuals, though the specific handle contours may feel more natural for right-handed users.

The frequency of sharpening depends on usage. For optimal performance, sharpen the blade whenever you notice a decrease in cutting efficiency or if it starts crushing stems instead of making clean cuts. For regular use, checking and sharpening monthly is a good practice.

Regular maintenance includes cleaning the blades after each use, sharpening the blade as needed, lubricating the pivot and locking mechanism periodically, and storing the pruners in a dry place.

The pruners are designed for a 25mm cut capacity. For very thick or old woody stems that exceed this, it is recommended to use a larger lopper or saw to avoid damaging the pruner's blades and mechanism.

Check for sap or debris build-up on the blade and pivot. Clean thoroughly and lubricate the pivot mechanism. Adjust blade tension if too tight.

The blade likely needs sharpening. Use a sharpening stone or file to restore the edge. Also, check and adjust the blade tension to ensure it is tight enough for a clean cut.

Tighten the central pivot bolt. Ensure the locking plate is engaged if the issue persists during operation, which may indicate the tension is set too loosely.

Wipe the blade dry immediately after use and store in a dry environment. Light rust can be removed with a fine-grade steel wool or sharpening stone. Apply a light coat of oil for protection.