Wavin Osma RoundLine Stopend Outlet - 112mm - Black
The Wavin Osma RoundLine is a 112mm (4½") gutter system designed for domestic standard use. It fea...The Wavin Osma RoundLine is a 112mm (4½") gutter system designed for domestic standard use. It features a circular 68mm downpipe and is suitable for a maximum roof area of 163m² with a single downpipe. This stopend outlet connects the RoundLine gutter to a 68mm downpipe and has one end blanked off. It serves as an alternative to a running outlet and internal stop end, offering lower capacity. The system is made from PVC-U and is also available in grey. It is part of the Osma Roundline guttering range and is a stopend outlet designed for efficient water management.
The Wavin Osma RoundLine Stopend Outlet is designed for domestic standard use, effectively connecting a 112mm gutter to a 68mm downpipe. Its primary benefit is providing a clean and efficient termination point for your guttering system. A potential caveat is its lower capacity compared to running outlets, making it suitable for roof areas up to 163m² with a single downpipe. This PVC-U component is part of the Osma Roundline range, available in black and grey, offering a durable solution for rainwater management.
All features
Model Part Number
0T007b
Brand
OSMA
Extended Product Information
FAQs
What is the main purpose of a stopend outlet?
A stopend outlet is used to terminate a gutter run. It closes off the end of the gutter and directs water into a downpipe.
What is the maximum roof area this outlet can handle?
This stopend outlet is suitable for a maximum roof area of 163m² with a single 68mm downpipe.
What size downpipe does this outlet connect to?
It connects to a 68mm round downpipe.
What material is the Wavin Osma RoundLine Stopend Outlet made from?
It is made from durable PVC-U.
Can I use this with a different brand of guttering?
While it might physically connect, it is designed specifically for the Wavin Osma RoundLine 112mm gutter system for guaranteed compatibility and performance.
Is this outlet suitable for commercial buildings?
This system is designed for domestic standard use. For larger commercial buildings, higher capacity systems may be required.
Does this product come in different colors?
Yes, the Wavin Osma RoundLine system, including this stopend outlet, is available in black and grey.
Troubleshooting
Leaking at the joint
Ensure sufficient PVC-U solvent cement was used and applied correctly to both surfaces. Re-clean and re-cement the joint if the leak persists.
Gutter overflowing at the stopend
Check if the downpipe is blocked or if the roof area exceeds the recommended maximum of 163m² for a single downpipe. Ensure the stopend outlet is not the cause of a blockage.
Outlet not fitting securely
Verify that you are using the correct 112mm RoundLine gutter and a 68mm round downpipe. Ensure no debris is obstructing the connection points.
Pros and Cons
Pros
Durable and weather-resistant PVC-U material
Easy integration with the Osma RoundLine gutter system
Provides a secure and clean termination for gutter runs
Cost-effective solution for domestic rainwater management
Available in common colors (black and grey)
Cons
Lower capacity compared to running outlets
Only suitable for roof areas up to 163m² per downpipe
Requires a compatible 68mm downpipe
Primarily for standard domestic use, may not be suitable for larger commercial buildings
Setup, Compatibility & Care
Setup:
Ensure the end of the 112mm RoundLine gutter is clean and free from debris.
Apply appropriate PVC-U solvent cement to both the inside of the stopend outlet's connection point and the outside of the gutter end.
Firmly push the gutter into the stopend outlet, twisting slightly to ensure an even spread of cement.
Hold in place for a few minutes to allow the cement to bond.
Connect a 68mm round downpipe to the outlet.
Compatibility:
This stopend outlet is specifically designed for the Wavin Osma RoundLine 112mm gutter system.
It requires a 68mm round downpipe.
Ensure all connected components are from the same system for optimal fit and performance.
Care:
Regularly inspect the system for debris (leaves, twigs, etc.) and clear any blockages. This can be done annually or more frequently if surrounded by trees.
Clean the exterior with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
Check for any signs of damage or wear, especially after severe weather.