Challenge Elite Road Tyre - 700 x 25mm - Tan

Tubular tyres offer a smoother ride, better road feel, and can often be run at lower pressures for comfort and grip. They are also less prone to catastrophic blowouts compared to some clincher setups.

The PPS flat protection is integrated into the casing and is designed to last the lifespan of the tyre, offering consistent protection against punctures throughout its use.

No, this is a tubular tyre and requires specific tubular rims. It cannot be used with standard clincher rims.

The recommended internal rim width for this tyre is between 13mm and 15mm.

The tyre can handle a pressure range of 7-12 BAR (100-175 PSI). Always adhere to the lower end of this range for optimal comfort and grip during training.

Clean the surface with a damp cloth and mild soap if necessary. Avoid abrasive cleaners. Regularly check tire pressure and inspect for any damage or embedded debris.

No, this tyre is sold as the tyre only. Rim tape or glue is typically purchased separately for tubular tyre installation.

Ensure the valve stem is properly seated and the valve core is tightened. Check for any small punctures that may have been missed during installation.

This could indicate improper gluing or a defect. If glued, carefully inspect the adhesion. If a defect is suspected, contact customer support.

Ensure correct tire pressure is maintained and avoid riding over sharp objects. The PPS protection helps, but aggressive riding conditions can still cause wear.