AB Tools Mini Timber Wood Joist Hanger 47mm Decking Loft Galvanised Beam Holder 2Pk - Silver

This joist hanger is designed to accommodate timber joists up to 100 mm in height.

The hanger is pre-punched for 30 x 3.75 mm sherardised square twisted nails.

No, this is a mini joist hanger and is best suited for light-duty applications such as trimming around ceiling hatches or installing basic decking. It is not designed for heavy structural loads.

This specific product variant comes in a pack of 2.

The joist hanger is manufactured from 0.9 mm thick galvanised steel.

Yes, the galvanised steel construction provides corrosion resistance, making them suitable for outdoor use in typical weather conditions. However, avoid prolonged exposure to highly corrosive environments.

The width of this particular joist hanger is 47 mm.

Ensure the joist is the correct nominal size and has not been excessively dried or warped. Trim the joist slightly if necessary, or consider a hanger with a different internal width if available.

Verify that you are using the recommended 30 x 3.75 mm sherardised square twisted nails. Ensure the wood is not overly dense or wet. Predrill pilot holes for extremely dense wood.

While galvanised steel offers protection, prolonged exposure to highly corrosive environments may eventually affect the coating. Clean the affected area and consider applying a suitable metal primer and paint for added protection if necessary.

Double-check that all available fixing holes have been used on both the main beam and the joist. Ensure the joist is flush and square before fastening. Re-evaluate if the application exceeds the light-duty capacity of the hanger.