Best current price£17.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - Envy All-In-One PaintHigh Coverage Multi Surface Paint For WallsWood & Furniture All White0.5LMatt
Visit shop14 offers from £17.95 - £74.95
View price history by clicking the chart icon.
The Home's Envy All-In-One Paint is designed for DIY enthusiasts and homeowners seeking a professional finish with simplified application. Its key benefit is acting as both a paint and primer, reducing project time and product costs. A potential consideration is that while versatile, highly specific finishes might require dedicated products.
| Colour | White |
|---|---|
| Model Part Number | 5056291359803 |
| Brand | Home's Envy |
Yes, this paint is suitable for most metal surfaces, provided they are clean, dry, and free from rust. Light sanding can improve adhesion.
While it functions as a paint and primer, two coats are generally recommended for optimal coverage, depth of color, and durability. However, this can vary depending on the surface and the existing color.
Yes, the paint is tough, washable, and scrubbable, making it suitable for high-traffic areas where durability and easy cleaning are important.
Drying times can vary depending on conditions, but typically it's recommended to wait at least 2-4 hours between coats. Always refer to the specific product instructions for precise timing.
It is generally advisable to lightly sand glossy surfaces, including oil-based paint, to create a key for the new paint to adhere to. Ensure the surface is clean and dust-free afterward.
As a water-based emulsion, it has a relatively low odor compared to traditional solvent-based paints, making it more pleasant to use indoors.
Clean brushes, rollers, and any other equipment immediately after use with warm water and soap.
Ensure the surface was properly prepared (clean, dry, free from grease and dust) and lightly sanded if it was glossy. For very porous surfaces, a second coat might be needed after initial drying.
Ensure the paint was stirred thoroughly. Apply in thin, even coats. Maintain a wet edge to avoid lap marks. Using a high-quality brush or roller can also improve the finish.
Check environmental conditions. High humidity or low temperatures can significantly slow drying times. Ensure adequate ventilation. Avoid applying thick coats.
Ensure all existing mould was completely removed and the area was treated with a mould remover before painting. For persistent issues, address the source of moisture or condensation.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For previously painted surfaces, ensure they are sound. Remove any existing mould with a suitable cleaner before painting.
Application: Stir the paint thoroughly before use. Apply with a brush, roller, or sprayer. Two coats are generally recommended for best results, allowing adequate drying time between coats as per the manufacturer's instructions. Avoid painting in very humid conditions or at temperatures below 10°C.
Compatibility: This paint is designed for use on a wide variety of surfaces including plaster, drywall, wood, metal, concrete, brick, and previously painted surfaces. It is not recommended for use on plastics or very flexible surfaces without a suitable primer.
Care: Clean brushes and equipment immediately after use with water. For maintenance, the painted surface can be washed using a damp cloth and mild detergent. Avoid abrasive cleaners or scrubbing tools, which can damage the finish.
