Evo-Stik Wood Adhesive Extra Fast is a one-part synthetic resin emulsion adhesive for general bond...Evo-Stik Wood Adhesive Extra Fast is a one-part synthetic resin emulsion adhesive for general bonding of wood assemblies for non-structural applications. It has suitable properties for internal use and for protected external use.
Evo-Stik Resin W Wood Weatherproof Adhesive Glue INTERIOR Fast Dries Clear 125ML
For interior use
Dries clear within 24 hours- can be sanded, painted or stained
Resin W is an extra strong adhesive which dries to form a bond stronger than the wood itself
Easy open & close nozzle with easy application
Fast setting formula ensures a good bond within 5-10 minutes
Suitable for use between 5 degrees C - 30 degrees C
Ideal for general joinery & woodworking use
Evo-Stik Wood Adhesive Extra Fast is a one-part synthetic resin emulsion adhesive for general bonding of wood assemblies for non-structural applications. It has suitable properties for internal use and for protected external use.
Anti-roll bottle designed to dispense the correct amount of adhesive
No mess wood adhesive that dries to form a bond stronger than the wood itself
Sandable
Ask a Question
About Us
Evo-Stik Resin 'W' Wood Adhesive (Interior) 125ml
125ml
Use for general bonding of wood assemblies for non-structural applications.
Suitable for internal and protected external use.
One-part synthetic resin emulsion adhesive
This guide is for anyone looking to use Evo-Stik Wood Adhesive Extra Fast for their woodworking projects. It provides a strong, fast-drying bond ideal for interior and protected exterior use, making it great for various general joinery tasks. However, it's designed for non-structural applications, so it might not be suitable for heavy-duty projects.
All features
Colour
White
Model Part Number
715110
Brand
Evo-Stik
Extended Product Information
FAQs
How long does it take for the adhesive to dry?
The adhesive sets in 5-10 minutes. Allow 24 hours for complete curing for optimal results.
Can I use this adhesive on all types of wood?
This adhesive is suitable for most wood types. However, always test on a small, inconspicuous area first.
Is this adhesive waterproof?
It is suitable for protected exterior use. Prolonged exposure to water is not recommended.
Can I paint or stain over the adhesive?
Yes, once the adhesive is fully dry, it can be sanded, painted, or stained.
What is the shelf life of the adhesive?
The shelf life depends on storage conditions. Store in a cool, dry place and follow the manufacturer's recommendations on the packaging.
How should I clean up the adhesive?
Clean up any excess adhesive with a damp cloth before it dries. Dried adhesive can be sanded off.
What is the ideal temperature range for using this adhesive?
It is suitable for use between 5 degrees C - 30 degrees C.
Troubleshooting
Bond is weak or fails.
Ensure surfaces were properly prepared (clean, dry, and free of contaminants). Apply an adequate amount of adhesive. Make sure the pieces were clamped or held together firmly during the setting time.
Adhesive takes too long to dry.
Check the temperature and humidity levels; ensure they are within the recommended range (5°C - 30°C). Apply a thinner layer of adhesive.
Adhesive doesn't spread easily.
Ensure the adhesive is not expired and is stored correctly. The nozzle might be blocked; clean or replace it.
Pros and Cons
Pros
Fast drying time
Creates a strong bond
Suitable for a variety of woodworking projects
Easy to apply
Can be sanded, painted, or stained
Cons
Not suitable for structural applications
Limited to use between 5°C - 30°C
Requires proper surface preparation for optimal results
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and old glue.
Application: Apply a thin, even layer of adhesive to one or both surfaces. For porous materials, apply to both surfaces.
Assembly: Join the pieces within the adhesive's open time (typically a few minutes).
Clamping: Clamp or hold the pieces together firmly for the recommended setting time (5-10 minutes).
Curing: Allow the adhesive to fully cure (24 hours for best results) before applying stress.
Compatibility: Suitable for bonding wood assemblies for non-structural applications. Compatible with wood for interior and protected exterior use.
Care: Store in a cool, dry place. Avoid extreme temperatures. Clean up any excess adhesive with a damp cloth before it dries.