Lister Cartwright Wooden Curtain Poles - Aged Oak URN, 300 cm

Currently unavailable

Currently unavailable
This Lister Cartwright wooden curtain pole, with its classic Aged Oak URN finials and 300 cm length, is ideal for homeowners looking to add a traditional and elegant touch to their window treatments. Its key benefit is providing a sturdy and attractive support for curtains, though it's important to note that poles 240cm and above are supplied in two sections with a joiner. The product offers a durable wood construction, decorative finials, and includes all necessary fittings and coordinating curtain rings.
| Colour | Brown |
|---|---|
| Model Part Number | HICS0165AGOS300 |
| Brand | Lister Cartwright |
| Options | Aged Oak URN, 300 cm |
The pack includes one pole (may be in two sections for lengths 240cm and above), two finials, two or three brackets (depending on length), coordinating curtain rings, and fixings.
No, the stated pole length (300 cm in this case) does not include the finials. You should allow up to an additional 14cm to accommodate them.
The quantity of rings supplied is based on the industry standard of 1 ring per every 10cm of pole length. For a 300cm pole, you would typically receive around 30 rings.
Yes, the wooden pole can be cut to your required length. Ensure you use appropriate tools for cutting wood and smooth any rough edges afterward.
Wipe the pole clean with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or excessive moisture.
The diameter of this curtain pole is 28 mm.
The 28mm diameter provides good support for medium to heavy curtains. Ensure adequate bracket support is used, especially for longer lengths and heavier fabrics.
Ensure the joiner is fully inserted into both pole sections. Check for any obstructions in the pole ends or the joiner itself. If the fit is still loose, contact customer support.
Verify that the correct wall fixings have been used for your wall type (e.g., plasterboard, brick). Ensure all screws are tightened securely. Consider using stronger, appropriate wall plugs if necessary.
Check that the pole surface is clean and free of debris. Ensure the rings are not snagging on the joiner. Occasionally, a small amount of wax or silicone spray can help improve glide.
Most finials screw onto the pole. Try tightening them by hand. If they continue to be loose, check if there is a grub screw or other mechanism for securing them.
Setup:
Compatibility:
Care: