Pavetuf Priming Slurry - 17Kg

It is used to create a strong bond between paving materials and a mortar base, ensuring lasting adhesion.

It is compatible with stone and porcelain paving.

Mix the slurry with water according to the instructions on the product packaging until you achieve a smooth consistency.

One tub of Pavetuf Priming Slurry provides approximately 12m² coverage.

Yes, it is suitable for both domestic and commercial applications.

Clean up spills immediately with water before the slurry dries.

Store it in a cool, dry place away from direct sunlight and extreme temperatures.

Allow the mortar and slurry to cure according to the manufacturer's instructions before exposing the paving to heavy use. This typically takes several days; refer to product guidelines.

Ensure the surfaces were properly prepared and cleaned before applying the slurry. Check that the slurry was mixed correctly and applied evenly to both surfaces. Allow sufficient curing time.

Check the water-to-slurry ratio and adjust accordingly. Ensure you are mixing thoroughly until a smooth consistency is achieved.

Ensure that the slurry is applied evenly and not too thickly. The surface conditions will impact coverage.