CT1 BW1 Ultimate Tanking Solution 5L - Green

Coverage depends on the surface and application method, but typically, a 5L container covers approximately 5-7 square meters with two coats. Always check the product label for specific details.

It is generally recommended to remove existing waterproofing before applying CT1 BW1 to ensure optimal adhesion. Clean the surface thoroughly before application.

While primarily designed for interior wet areas, BW1 can be used in some outdoor applications. However, always ensure the surface is protected from direct sunlight and extreme weather conditions.

No, CT1 BW1 is designed to eliminate the need for joint tapes and corner pieces. Its flexibility and bonding strength provide a seamless waterproof layer.

Yes, once the BW1 has fully cured (typically within 24 hours), you can tile directly onto the waterproof membrane. Use a suitable tile adhesive that is compatible with the product.

The shelf life is typically 12 months when stored in a cool, dry place and in its original, unopened container. Always check the expiration date on the packaging.

Yes, CT1 BW1 is compatible with underfloor heating systems. Ensure the system is installed according to the manufacturer's guidelines and the BW1 is fully cured before turning on the heating.

Wear appropriate protective equipment, including gloves and eye protection. Ensure adequate ventilation during application. Avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water. Keep out of reach of children.

Ensure the surface is clean and properly prepared. Roughening the surface can improve adhesion. If needed, apply a primer suitable for the substrate.

Ensure adequate ventilation in the application area. High humidity or low temperatures can extend drying times. Check the product expiration date.

Ensure adequate ventilation during and after application. Though the product is VOC-free, some odor may be noticeable during application.